Pedros Beverage Wrench
Description
Shop Quality Bottle Opener
Precision laser-cut, heat-treated tool steel construction.
Ergonomic design for maximum leverage and comfort.
Compatible with domestic and imported beers.
We dug deep to design this essential shop tool. Pulling inspiration for across our innovative tool lineup, you will find this to be the best shop quality bottle opener available. After all, sometimes you need a little inspiration to fix that derailleur that just won't shift right no matter what you try! A must for every tool box or gear bag. Compatible with both domestic and imported beers and the more you use it, the better it works...or at least it seems that way! Backed by Pedro's lifetime warranty.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:15 September 2026Expected Date:15 September 2026Expected Date:15 September 2026Expected Date:15 September 2026Expected Date:15 September 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:PDTL6451210
Universal Crank Remover with Handle
- Made from heat-treated tool steel.
- Capable of all functions needed to remove square taper and splined cranks.
- Includes: Puller with integrated ergonomic handle, inserts for splined and for square taper cranks, and 8mm hex for crank bolt removal.
- Precision tolerances provide perfect fit and floating tip design ensures easy crank removal.
Pedro's Universal Crank Remover provides the tools required to properly remove press fit square taper and splined cranks and unlike similar items offered by the competition, we include everything you need in one convenient package
The Universal Crank Remover fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles and splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a “self extracting” system. The 8mm hex wrench is perfect for crank bolts and can also be used in pedals with 8mm broach.
Pair with a standard 15mm pedal wrench for easy pedal removal.
Backed by Pedro's lifetime warranty.$42.00 (RRP)Add To Cart
-
Stock Code:ABTL-SLPRS-DRVR35MM
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.$56.00 (RRP)Add To Cart
-
Stock Code:ABTL-4WAY25452JIS
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket.
Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag.
The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night.
Custom bit option: Hex Bits: 2.5, 3, 4, 5, #2 jis (DIN) compatible Phillips (aka cross point)$82.00 (RRP)Add To Cart
-
Stock Code:SWTL-FFXDIY
FOX FLOAT X (2022+) Full DIY Rebuild Toolkit
Complete home rebuild toolkit for the FOX FLOAT X and Bomber Air shocks (2022+). Covers everything needed for a proper 50h service up to a full 200h damper rebuild.
The two main dynamic O-rings (damper shaft + IFP) are included in this kit.
FOX specifies several chamferless sockets for this shock, but in practice the rebuild can be done safely with standard tools, as long as torque is controlled properly using the luggage scale method.
What’s Included in the Kit
- 1/2" Shaft Clamp — fits the FLOAT X / Bomber Air main shaft
- Graduated IFP Depth Tool — required for accurate IFP depth setting
- FLOAT X Pin Socket — required for 47.5–75 mm travel shocks
- 2× Main Dynamic O-rings (included) — damper shaft seal O-ring and IFP seal O-ring
Tools NOT Included (You Still Need These)
This kit does not include common shop consumables and small tools required to complete the rebuild:
- Valve core remover
- Shock pump
- RockShox air fill adapter (FOX uses the same thread)
- Syringe for oil transfer / bleed cleanup
- Damper oil (4 wt)
- Basic hand tools (Allen keys, open-end wrenches)
If you’ve serviced shocks before, you probably already own all of these.$102.90 (RRP)Add To Cart
