Pedros Travel Keeper
Description
Structurally supports rear dropouts for maximum frame protection during travel.
Allows full forward or backward rotation of drivetrain and shifting through full range of gears.
Adjustable design fits 130 and 135 QR dropouts and all 12mm thru axle frames up to 12x157.
Professional grade aluminum and solvent resistant plastic components ready for daily life in the wash bucket or traveling the world.
The Travel Keeper is equally at home protecting a frame’s rear triangle during travel or providing full chain keeper functionality. Adjustable design fits all rear QR and 12mm thru axle frames and features aluminum construction, shifting across all gears, and heavy-duty solvent resistant plastic pulley.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:BBTL-TO-BOTTOMBRACKET3
Allows disassembly and assembly of bottom brackets bearings:
24mm / 25mm / 30mm / BB86 / BB92 / BB95 / BSA24 / BSA30 / 386EVO$590.00 (RRP)Add To Cart
-
Stock Code:ABTLABTPRESSHV2
This press is the backbone of any modern shop. Bearing related work is becoming more and more common on modern bikes and no shop, professional or amateur should pass over these tools. The Modular bearing press starts with the press head. Where most manufactures just have a glorified nut we went further by adding a massive thrust bearing. Not a wimpy little plastic washer either, an actual bearing with balls and races. What this means is that the pressing action is almost completely isolated from the torque, creating a super smooth pressing action that requires noticeably less effort. Then we added a pair of 5" machined handles for a little extra leverage. We use a 1/2" acme thread for our press shaft, which means a more robust thread and less turning due to it's coarser thread. It also means we have a single diameter to work with and can size our drifts to this dimension, this means your bearings are more likely to go in straight. At the other end of the press is our new Quick Nut. This simple part allows you to slide the nut over the press shaft to the desired location and then click it into place and press away. No endless turning, no pinch hazard and no wasted time. Be aware, the quick nut does require a few uses to fully break in.
Kit includes a complete handled press head, 12" press shaft, quick nut and the following drifts;
PF30/1.125" headset
24mm bottom bracket drifts, for shimano compatible bottom brackets
22mm bottom bracket drift, single drift for non drive GXP bottom bracket
28.9mm bottom bracket drift, for SRAM DUB
6806 drift for BB30 bottom brackets
1.5" headset drift
centering cone
Additional drifts are on the bearing page and longer press shafts along with service parts are available on the parts page.
We always recommend installing bearings one at a time to ensure they go in straight and don't damage the bearings, components or the tools. Use the centering cone in the empty side of the hub/frame/linkage to keep the press concentric with the bore.
Made in Bend Oregon.$635.00 (RRP)Add To Cart
-
Stock Code:RLTL-LTP50
Crushproof fully featured Pro syringe with a 50ml capacity.
Designed for tyre sealant and suspension oil.
Luer-Lock fitting accepts any attachment.
Luer-Lock Compatible
Crushproof Premium Construction
Stainless Connection Fitting with O-Ring
Replaceable O-Ring Sealing Plunger
Ergonomic Dispensing Handle
1ml Graduation Marks
Brass Plunger Rod with Dosing / Locking Nut
Includes Loobtoob Label (not applied)
Includes Replacement O-Rings
Guaranteed for life!$24.00 (RRP) -
Stock Code:ABTL-DUBDSTCPTI
This dedicated socket is built to engage all 4 of the holes on a SRAM dub crank arm dust cap. These caps don't normally need to be removed but when you do need to work with them, few things work well. These tools feature a common 3/8" square drive like the rest of our socket range and also have a hexagonal exterior so you can mount them in a vise and use the crank arm as the lever if so desired. The sockets are also marked for the left hand thread (clockwise to loosen) this part uses.
Compatible with all SRAM dub cranks, road/mountain/gravel.
Made in Bend Oregon.$63.00 (RRP)Add To Cart
