MTX GoldL HD Pads Formula Cura 4-piston
Description
This model fits Formula Cura 4, 4-piston brake set.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:YZBR730012Stock Code:YZBR730013Stock Code:YZBR730010Stock Code:YZBR730011Stock Code:YZBR730022Stock Code:YZBR730023
Yokozuna Motoko Road Disc Brake, Front - Black POST MOUNT
Hydraulic brake performance without the complexities of full hydraulic brakes. A great option for touring cyclists who've gotten stuck out in the boonies with a leaky brake line. But high performance enough for CX, road race and gravel events.
By sticking with a cable system you not only keep reliability, but you don't need a dedicated hydraulic brake lever. You can use your old Dura Ace brifters.
Premium compressionless cables, IS mount hardware and 160mm stainless steel rotors included. (If your bike can't handle our stout compressionless housing, you can run standard brake housing too)
- Compatible with cable-actuated Road Brake Levers
- Closed Hydraulic System (Mineral Oil)
- Includes Reaction Compressionless brake cable set for superb response
- Dual Piston pad action
- Simple one knob pad adjustment
- Caliper weighs only 145 grams.$302.82 (RRP)$302.82 (RRP)$302.82 (RRP)$302.82 (RRP)$302.82 (RRP)$302.82 (RRP) -
Stock Code:YZBR730036Stock Code:YZBR730037Stock Code:YZBR730038Stock Code:YZBR730039Stock Code:YZBR730024Stock Code:YZBR730025Stock Code:YZBR730027Stock Code:YZBR730026
A cable/hydraulic hybrid disc brake system offers power and modulation of fully hydraulic brakes without the complexity and hassles that sometimes accompanies those systems.
The Ultimo’s main difference from the Motoko is that the Ultimo has four pistons (vs. 2) and larger pads. The rotor is also equipped with removable aluminum heat sinks.
Compatible with cable-actuated Road Brake Levers (SHORT PULL)
– Flat mount standard
– Closed Hydraulic System (Mineral Oil)
– Four coated pistons
– Includes Reaction Compressionless brake cable set for superb response
– Includes 160mm, 6-bolt stainless steel rotor (*Rear caliper is designed to fit 160mm rotors w/o requiring an adapter)
– Simple one knob pad adjustment
– Uses Shimano D-type pads (Saint/Zee)
– Caliper weighs only 139 grams.
– Black or Silver$499.68 (RRP)$454.25 (RRP)$454.25 (RRP)$454.25 (RRP)$499.68 (RRP)$499.68 (RRP)$454.25 (RRP)$454.25 (RRP) -
Stock Code:PCBR-030BLACKStock Code:PCBR-030PEWTERStock Code:PCBR-030POLISHStock Code:PCBR-030PURPLEStock Code:PCBR-030SILVER
The Short Pull Touring Canti is a powerful cantilever brake with a similar design to the Neo-Retro, but with the arms angled upward. This gives the brake a much narrower profile without significantly reducing stopping power.
The narrower profile of the Touring Canti can be desirable if you’re riding with large panniers or if your current brakes don’t give you enough heel or calf clearance.
The arms of the Touring Canti are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.
The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine-tuned thanks to the spherical washers on the brake pads’ threaded posts.
Like all of Paul brakes, the Touring Canti has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you’re riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.Expected Date:30 April 2026$281.00 (RRP)$281.00 (RRP)$358.00 (RRP)$281.00 (RRP)$281.00 (RRP) -
Stock Code:PCBR-073BLACKStock Code:PCBR-073SILVERStock Code:PCBR-070BLACKStock Code:PCBR-070PEWTERStock Code:PCBR-070POLISHStock Code:PCBR-070PURPLEStock Code:PCBR-070SILVER
The Canti Lever is a short pull brake lever for use with short pull brakes like cantilevers, center pull brakes, and side pull caliper brakes.
These levers are machined by Paul in Chico California to exacting specifications. The pivot features a dual sealed cartridge bearing for the smoothest, stiffest brake lever you will ever use.
Like all Paul components, these will be serviceable for a lifetime.
Recommend for use with Paul Racer, Neo-Retro, Touring Canti, Mini-Moto or Short Pull Klamper brakes, but they work well paired with any road caliper brake, cantilever brake, or other short pull brake. For a long pull brake lever, see the Love Lever Compact or Love Lever 2.5.$405.00 (RRP)$405.00 (RRP)$405.00 (RRP)$405.00 (RRP)$501.00 (RRP)$405.00 (RRP)$405.00 (RRP) -
Stock Code:MTBRRL165
This model fits the following brakes:
SRAM Level (not Level Ultimate or Level TLM – those are either RL170 or RL160)
Avid Elixir 3, 5, R, CR, CR Mag, X7, X9, X0, XX.
These fit exactly the same as our RL160 – its purely preference and does not matter which one you choose. Mechanics prefer the RL165 because it is easier to handle given the knurled tab.$65.00 (RRP)Add To Cart
