Soma Handlebar Extender 50mm Black
Description
If you find your current bars were cut too short or designed too short to fit your brake lever and shifter set up, check these out.
Attach these to your bar ends to add 50mm (2") to each side of your bar. Also useful if you want to your cruiser bars to reach back a little farther.
- For city/MTB bars with 22.2mm OD.
- Aluminum constuction
- 50mm of extension per unit
- The resulting fit is not perfectly seamless, but good enough to where it should feel normal after grips are installed.
- DO NOT use on bars that have been partially machined out at the ends (to fit bar end shifters or reverse levers) This includes Soma Oxford, Sparrow and 3-speed II bars
- ID not sized to accept reverse levers or bar end shifters.
- Requires a 6mm hex key (2 inches long) to install
Webshops and Bike shops
You may also be interested in...
-
Stock Code:TNHB-HB-E128
Thomson Cyclocross 42x31.8 Carbon
Clipon compatible keep all accessory clamps inside the area marked on the bar as safe for clamping. 90mm total safe clamp area available.
For Cyclocross we present the carbon CX bar. The natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a completely round bar when wrapped. Top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
Reach 78.5mm. Drop is proportional.
Cross drops are: 40CM 131mm, 42CM 133mm, 44CM 135mm.$355.00 (RRP) -
Stock Code:SLHB-HB0100
If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that’s your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don’t you worry. We added cut marks so you can easily make it so.
- Material: CroMoly steel
- Clamp diameter: 31.8mm
- Width: 735mm; Cut marks for 685mm
- Rise: 27mm
- Sweep Angle: 34 degrees
- Weight: 709g
- Color: Black$215.00 (RRP)POA -
Stock Code:SAHB-HB0349Stock Code:SAHB-HB0351Stock Code:SAHB-HB0352Stock Code:SAHB-HB0353
Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12-degree flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops.
- Lightweight and strong 7050-T76 series alloy construction with polished finish
- Drop/Reach: 115/68mm
- 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars
- 12 deg flare and drop anglesPOAPOAPOAPOA -
Stock Code:SMHB278021Stock Code:SMHB278022
Riser bar with extra bend, but a low rise. Not as much bend as Soma's original Dream Riser, but enough so grips don't get in the way of large bar bags.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 25mm
– Backsweep: 20 degrees
– Upsweep: 5 degrees
– Weight: 425g$214.00 (RRP)$214.00 (RRP) -
Stock Code:SMHB278031Stock Code:SMHB278032
Riser bar with extra bend and lots of rise. Try it for bike packing or commuting. Also a bar to look at if your bike feels like it has too much reach or too little stack.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 70mm
– Backsweep: 30 degrees
– Upsweep: 5 degrees
– Weight: 470g
(Not made for aggressive Enduro or DH riding)$214.00 (RRP)$214.00 (RRP)
