Wolf Tooth GnarWolf Chainguide Braze-on
Description
The Wolf Tooth GnarWolf Braze-On Chainguide rev2 provides maximum chain retention in the roughest gravel, CX, and road races. Designed specifically around 1x wide/narrow chainrings, the GnarWolf Chainguide rev2 will keep your chain glued to your chainring in the most extreme of conditions. No other gravel, road, or CX chainguide is as rigid or as easy to adjust as the GnarWolf.
- 8mm of chainline adjustment via our GuideLock quick adjustment system. No shims required.
- Infinite vertical adjustment between 34T and 46T for round and oval chainrings
- Loosen one screw to flip the guide out of the way for easy chain removal without losing any of the guide's adjustments
- All adjustments made with common 4mm hex key
- Designed for the rigors of the muddiest CX course or roughest gravel riding, the Wolf Tooth engineers made this guide extremely stiff and strong while keeping it light at 44g
- Specific guide shaping is optimized for use with elliptical/oval and round chainrings
- Installation takes just a few minutes – no need to remove your crank arms
Compatibility
- Designed to fit on any bike with an integral braze-on mount. If you have a round seat tube with no braze-on mount, you can buy a braze-on adapter
- Designed to accommodate chainlines from approx. 45mm to 51mm
- Minimum distance of 10 mm between crank and center of ring
- Optimized for use with oval and round 34-46T chainrings. (Clearance for larger chainrings is possible using the LoneWolf mid sweep and high sweep braze-on mount guides.)
- For 1x use only
- Not compatible with crankset mounted bashrings
* Note: Braze-on mount is not at the same height on all bikes so max chainring size will vary somewhat depending on frame brand and model
Webshops and Bike shops
You may also be interested in...
-
Stock Code:MKCT20532$43.26 (RRP)
Add To Cart
-
Stock Code:PCCT-200BLACKStock Code:PCCT-200POLISHStock Code:PCCT-200PURPLEStock Code:PCCT-200SILVER
Want to build a single speed without having to buy a dedicated frame? Try the Melvin. The Melvin bolts to the frame where the rear derailleur would normally go and allows the use of a single speed rear wheel on bikes with vertical dropouts.
The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap. This means that the Melvin will work with multiple front chain rings while maintaining proper chain tension. Of course this is no longer a true single speed, but can come in handy when two or three gears are all you need. Twenty teeth of chain wrap means that chain rings with a maximum difference of twenty teeth can be used up front.
Chain tension is optimized when the chain length is cut so that the pulleys are aligned vertically. For 1/8" cogs Paul recommend the silver SRAM PC-1 chain and any 8 speed chain for 3/32" cogs.$312.00 (RRP)$378.00 (RRP)$312.00 (RRP)$312.00 (RRP) -
Stock Code:PCCT-200BLACKStock Code:PCCT-200POLISHStock Code:PCCT-200PURPLEStock Code:PCCT-200SILVER
Want to build a single speed without having to buy a dedicated frame? Try the Melvin. The Melvin bolts to the frame where the rear derailleur would normally go and allows the use of a single speed rear wheel on bikes with vertical dropouts.
The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap. This means that the Melvin will work with multiple front chain rings while maintaining proper chain tension. Of course this is no longer a true single speed, but can come in handy when two or three gears are all you need. Twenty teeth of chain wrap means that chain rings with a maximum difference of twenty teeth can be used up front.
Chain tension is optimized when the chain length is cut so that the pulleys are aligned vertically. For 1/8" cogs Paul recommend the silver SRAM PC-1 chain and any 8 speed chain for 3/32" cogs.$312.00 (RRP)$378.00 (RRP)$312.00 (RRP)$312.00 (RRP) -
Stock Code:PCCT-600Stock Code:PCCT-600PEWTERStock Code:PCCT-600POLISHStock Code:PCCT-600PURPLEStock Code:PCCT-600SILVERStock Code:PCCT-610Stock Code:PCCT-610PEWTERStock Code:PCCT-610POLISHStock Code:PCCT-610PURPLEStock Code:PCCT-610SILVERStock Code:PCCT-620Stock Code:PCCT-620PEWTERStock Code:PCCT-620POLISHStock Code:PCCT-620SILVER
The Chain Keeper is a guide to keep your chain right where it belongs. Mounted in place of a front derailleur, the Chain Keeper works with single chain ring drivetrains using a narrow chain. The chain block surrounds the chain as it meets the chain ring and prevents it from skipping off.
Note: This is not designed for downhill, freeride, or big hit use.$207.00 (RRP)$207.00 (RRP)$273.00 (RRP)$207.00 (RRP)$207.00 (RRP)$207.00 (RRP)$207.00 (RRP)$273.00 (RRP)$207.00 (RRP)$207.00 (RRP)$207.00 (RRP)$207.00 (RRP)$273.00 (RRP)$207.00 (RRP) -
Stock Code:WTCT-GWLF-HEAD-BLU
Add color to your chainguide with GnarWolf Chainguide replacement heads. These heads are compatible with all rev1 and rev2 GnarWolf Chainguides.
Expected Date:08 May 2025POA
