MKS Bee Butt Flip Tabs
Description
MKS customized part for turning over the pedals with your toes while mounting toe clips or pedal straps, to make it easier to catch the tread surface.
- It can be easily fitted in pedal reflector holes with a 25 mm pitch and is compatible with the following MKS models:
SYLVAN GORDITO / SYLVAN TOURING / SYLVAN TOURING NEXT / SYLVAN TOURING NEXT Ezy Superior / SYLVAN STREAM / SYLVAN STREAM NEXT / SYLVAN STREAM NEXT Ezy Superior / BM-7 / BM-7 NEXT / CT-LITE / CYGMA / CYGMA Ezy / ESPRIT / ESPRIT Ezy Superior / UB-LITE / UB-LITE Ezy / MT-E / MT-LITE
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WTPDL-WF-LG-BLKStock Code:WTPDL-WF-LG-BLUStock Code:WTPDL-WF-LG-ORGStock Code:WTPDL-WF-LG-PRPStock Code:WTPDL-WF-LG-OLVStock Code:WTPDL-WF-LG-ESPStock Code:WTPDL-WF-LG-SILStock Code:WTPDL-WF-LG-GLDStock Code:WTPDL-WF-SM-BLKStock Code:WTPDL-WF-SM-BLUStock Code:WTPDL-WF-SM-ORGStock Code:WTPDL-WF-SM-PRPStock Code:WTPDL-WF-SM-OLV
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform, shaped to match the footprint of your shoe. They have a slim, dual-concave profile that is 14mm thick at the perimeter and just 12.5mm thick in the center, cradling your foot for optimal pedal feel. Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. The design also features a large, tapered leading edge to deflect pedal strikes on rough terrain. A custom radial seal protects three fully sealed cartridge bearings for low-friction riding in all conditions.
- Two sizes: Large is 112mm x 106mm, small is 105mm x 99mm
- Three high-precision, low-friction sealed bearings designed specifically for this pedal, with one igus bushing
- Custom radial seal to protect internal hardware from water, dirt, and trail debris
- Eleven stainless steel, rear-loading 4.5mm pins per side
- Dual Concavity secures your feet firmly in place on the pedals, both front-to-back and side-to-side
- Tapered leading edge deflects pedal strikes.
Weight: Large set 384g | Small set 373g$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP) -
Stock Code:WTPDL-RS-BLKStock Code:WTPDL-RS-RSIL
The new Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric aluminum platform provides strong foot support for all-mountain riding, while the minimal convex profile is just 7mm thick at the leading edge. These are designed for cyclists who prefer a mid-foot riding position, where the ball of the foot is in front of the pedal spindle and the arch of the foot aligns with the convex arch in the center of the pedal. Inside Ripsaw Aluminum Pedals is a 17-4 stainless steel axle, three sealed cartridge bearings, and one igus bushing with a custom radial seal to protect internal components from trail debris and dirt.
- One size: 118mm long x 102mm wide
- Twelve stainless steel, rear-loading grip pins on each side
- Six extra 4.5mm grip pins included
- Replacement parts and service guides available via Wolf Tooth Right to Repair
- Five-year warranty
- Exceeds all ISO safety standards
- Machined and assembled at Wolf Tooth in Minnesota, USA
Recommended
- Apply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarms.
- Pins can be removed for desired grip by using a 3mm hex tool.
- Includes 6 extra grip pins.
Compatibility
- Fits all standard cranks with 9/16-20 tpi right- and left-hand threads – some kid’s bikes and vintage bikes may have smaller incompatible threads.$345.05 (RRP)$345.05 (RRP) -
Stock Code:MKPD-14312Stock Code:MKPD-14512Stock Code:MKPD-143Stock Code:MKPD-145Stock Code:MKPD-143BStock Code:MKPD-143GStock Code:MKPD-143OStock Code:MKPD-143PStock Code:MKPD-143R
The original mountain bike pedals are back, resurrected by Blue Lug and MKS. If you don't like the pins digging into the soles of your shoes, these are a great, grippy but non-pinny option. Like our old RMX pedal, but with some MTB pedigree.
Expected Date:29 May 2026Expected Date:29 May 2026$109.00 (RRP)$109.00 (RRP)$85.00 (RRP)$85.00 (RRP)$92.00 (RRP)$92.00 (RRP)$92.00 (RRP)$92.00 (RRP)$92.00 (RRP) -
Stock Code:WTPD-ALT-CLPS-BLKStock Code:WTPD-ALT-CLPS-PRU
Wolf Tooth ALT XC Clipless Pedals are designed for commanding performance on trails and gravel roads. These pedals are simultaneously lighter and thinner than their Shimano, Hope, and HT counterparts, with an exceptionally low stack height, while also having more platform area for control and power transfer. This body design also features a more open center for better mud clearance than other clipless bike pedals. The SPD-compatible clip-in/out experience is quick and precise, with Wolf Tooth cleats included.
The ALT XC Clipless Pedals have an adjustable Q factor in 4 mm increments. Inside the pedal is a stainless steel axle, three bearings, and two spacers. The spacers and bearings can be rearranged for Q factors of 51, 55, or 59 mm. This is simple enough for anyone to do at home. A spacer kit including four 2 mm spacers is available for purchase to further fine tune Q Factor adjustment. Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair.
Thinner than the competition at 15 mm (compared to Shimano XTR 9200 at 16.5 mm, Hope RC at 18 mm, and HT M2 at 17.6 mm)
Lighter than the competition at 294 g (compared to Shimano XTR 9200 at 316 g, Hope RC at 322 g, and HT M2 at 306 g)
Larger platform area than the competition at 345 mm² (compared to Shimano XTR 9200 at 144 mm², Hope RC at 420 mm², and HT M2 at 357 mm²)
Adjustable Q factor options of 51, 55, and 59 mm
5 degrees float | 12 degrees release
SPD compatible
Proven axle and bearing design from Waveform Aluminum Pedals
Designed, tested, and machined at Wolf Tooth in Minnesota, USA$359.00 (RRP)$359.00 (RRP) -
Stock Code:WTPD-DEL-CLPS-BLKStock Code:WTPD-DEL-CLPS-PRU
Wolf Tooth DEL Gravel Race Clipless Pedals feature a one-sided design for peak speed and consistent performance in gravel races. These SPD-compatible bike pedals are exceptionally lightweight at only 216 g, while still featuring a large platform for maximum power transfer and a connected feel that approaches that of a road pedal. The one-sided design features an open center between the binding cages for mud shedding. It has all the advantages of a road pedal, but with a shoe and cleat system that works in all conditions.
The DEL Gravel Race Clipless Pedals have an adjustable Q factor of 4 mm increments. Inside the pedal is a stainless steel axle, three bearings, and two spacer. The spacers and bearings can be rearranged for Q factors of 51, 55, or 59 mm. This is simple enough for anyone to do at home. A spacer kit including four 2 mm spacers is available for purchase to further fine tune Q Factor adjustment. Like most Wolf Tooth components and accessories, replacement parts and service guides are available via Wolf Tooth Right to Repair.
Thinner than the competition at 14.7 mm (compared to Xpedo MF8 at 17 mm, Shimano XTR 9200 at 16.5 mm, and Eggbeater 3 at 17 mm)
Lighter weight than the competition at 216 g (compared to Xpedo MF8 at 220 g, Shimano XTR 9200 at 316 g, and Eggbeater 3 at 265 g)
Larger platform area for power transfer than the competition at 559 mm² (compared to Xpedo MF8 at 46 mm², Shimano XTR 9200 at 144 mm² and Eggbeater 3 at 102 mm²)
Adjustable Q factor options of 51, 55, and 59 mm (53 and 57 mm also available via spacer kit sold separately)
5 degrees float | 12 degrees release
SPD compatible
Proven axle and bearing design from Waveform Aluminum Pedals
Designed, tested, and machined at Wolf Tooth in Minnesota, USA$359.00 (RRP)$349.00 (RRP)
