- Home /
- Components /
- Bottom Bracket /
- BlackBearing B5 BB30 Campagnolo
BlackBearing B5 BB30 Campagnolo
Description
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-T47-BB-SHIM-BB
T47 threaded BB cups for T47 frames and 24.00mm spindle diameter cranks. Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
Bearings: Enduro ABEC-3
Bottom Bracket/Frame Interface: T47
Bottom Bracket Shell Width (mm): 68mm - 132mm
Bottom Bracket Shell I.D.: 47x1.0mm Threaded
Crank Spindle Diameter: 24.00mm
Over Bearing Width: 91.5mm in 86.5mm wide shell*
Tool Pattern: 48.5mm x 16-notchStock Level:In StockStock Level:In Stock$240.00 (RRP)Add To Cart
-
Stock Code:CKBB-PBB078
For DUB mountain cranks there are a few extra fitments notes to be aware of.
If you have a 68mm BB shell and a T47 bottom bracket you will need two of these 2.5mm Cup Spacers. SOLD INDIVIDUAL.Stock Level:Out Of StockStock Level:Out of Stock$24.50 (RRP) -
Stock Code:CKBB-AFB2Stock Code:CKBB-AFY1Stock Code:CKBB-AFM2Stock Code:CKBB-AFP1Stock Code:CKBB-AFS1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 30x fits 68mm and 73mm shell widths with 30mm spindles.
This bottom bracket comes packed with King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installationStock Level:2Stock Level:Out of StockStock Level:2Stock Level:Out of StockStock Level:Out of StockStock Level:Out of StockExpected Date:21 December 2026$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP) -
Stock Code:WMBB-ITA-24MM
Italian threaded road bottom bracket for 70mm shells. We use only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable.
Includes:
(2) - Enduro Silicone dust seals
(1) - 2.5mm aluminum BB cup spacer
(2) - 0.5mm crank spindle spacers
(2) - 1.0mm crank spindle spacers
Direct replacement for Shimano HollowTech II bottom brackets!Stock Level:2Stock Level:2$199.00 (RRP)Add To Cart
-
Stock Code:BBBB-46-73A-D-B5
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.Stock Level:1Stock Level:1$169.60 (RRP)Add To Cart