BlackBearing 24mm Spacers x 3
Description
Pack of 3 24x2mm Spacers
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-WAVEWSH-24MM-10Stock Code:WMBB-WAVEWSH-30MM-10
Used to take set proper side-load in PF30, BB30 and similar bottom bracket systems when using 30mm, 24mm (Shimano, FSA, etc.) or 22/24mm (SRAM/TruVativ) spindle cranks.
- Choose from 30mm I.D. or 24mm I.D.
- Sold 10 washers per bag$45.00 (RRP)$45.00 (RRP) -
Stock Code:WMBB-BB-29MM-0.5Stock Code:WMBB-BB-29MM-1.0Stock Code:WMBB-BB-29MM-2.5-5
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks.
- 29mm I.D.
- 2.5mm thick
- 5 spacers per bag
- Machined engineering-grade Delrin.$29.00 (RRP)$29.00 (RRP)$29.00 (RRP) -
Stock Code:WMBB-BB-T47A-GXPStock Code:WMBB-BB-T47A-24MMStock Code:WMBB-BB-T47A-29MMStock Code:WMBB-BB-T47A-30MM
T47a (asymmetrical) threaded BB cups for T47a frames and 24mm diameter spindle compatible cranks. Cups have internal bearings, and can be used in BB shells with widths from 77.5 - 79mm. Machined aluminum cups thread together directly into a Cervelo, Factor and Felt T47a BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47a BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
T47 external cup on the drive side
T47 internal cup on the non-drive side
Compatibility
- Cervelo T47a 79mm shell width
- Factor T47a 77.5mm shell width
- Felt T47a 77mm shell width$203.00 (RRP)$227.00 (RRP)$205.00 (RRP)$227.00 (RRP) -
Stock Code:CKBB-AFB2Stock Code:CKBB-AFY1Stock Code:CKBB-AFM2Stock Code:CKBB-AFP1Stock Code:CKBB-AFS1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 30x fits 68mm and 73mm shell widths with 30mm spindles.
This bottom bracket comes packed with King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP) -
Stock Code:CKBB-PBB018Stock Code:CKBB-PBB019Stock Code:CKBB-PBB003Stock Code:CKBB-PBB030$24.50 (RRP)$24.50 (RRP)$8.00 (RRP)$20.55 (RRP)
