BlackBearing B5 BB86/92 Praxis
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-BB-1.8Stock Code:WMBB-BB-2.5
Aluminum spacer for ISO/English or BSA threaded bottom brackets. Spacers fit between bottom bracket cup and frame. Great for fine tuning bottom bracket shells or improving chainline.
Outer Diameter: 40.7mm
Inner Diameter: 34.9mm
Thickness: 1.8mm
Machined aluminum
Anodized Black
Sold 1 spacer per bag$13.00 (RRP)$13.00 (RRP) -
Stock Code:WMBB-BB86/92-SRAM7
Directly replaces all OEM BB86 products. Use with 24/22mm (SRAM, Truvativ, Etc.) cranks. Enduro ABEC 3 sealed bearings. Double lip seals on all bearings with high fill rate top quality grease for maximum durability. Machined aluminum is superior in function and durability to plastic. Fully serviceable.
Made in the USA
Black anodized, machined aluminum cups
Enduro ABEC 3 sealed bearings
Dual silicone seal keeps the contamination out for longer life
Fits bottom bracket shell widths from 86mm to 92mm
Use with 24/22mm (SRAM, Truvativ, Etc.) cranksExpected Date:15 September 2026$225.00 (RRP) -
Stock Code:CKBB-AAB1Stock Code:CKBB-AAR1Stock Code:CKBB-AAS1Stock Code:CKBB-AAT2Stock Code:CKBB-AAY1Stock Code:CKBB-AABFStock Code:CKBB-AAB2Stock Code:CKBB-AAM2Stock Code:CKBB-AAP1Stock Code:CKBB-AAZ2Stock Code:CKBB-AAG2
REQUIRES A CHRIS KING THREADFIT24 FIT KIT
ThreadFit™ 24 fits 24mm cranks in 68mm BB shells.
Our ThreadFit™ 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create the most precise interface between your frame’s bottom bracket shell and your cranks, it makes your cranks spin lightly and easily, without interference, for the lifetime of your bike (with a little regular service). King’s legendary, angular-contact bearings, both steel and ceramic, are the best in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP) -
Stock Code:CKBB-AGB1Stock Code:CKBB-AHB1
ThreadFit T47A 24 fits T47 BB-Right shells with 24mm spindles.
It’s a silky smooth, long-lasting bottom bracket built around King’s legendary angular-contact bearings.These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation*
- Fit Kit required for use**$349.00 (RRP)$349.00 (RRP) -
Stock Code:BBBB-EM-045-BOSH
This bushing is designed to be installed on the crankset axle of the Gen 4 Bosch motor.
It is strongly recommended replacing both bushings per motor for optimal performance.
When the friction bushings wear out, play may develop in the crankset axle, even after replacing the bearings included in the EM-026-BOSCH service kit (or with individual bearing replacements). As this part is not sold separately by Bosch, their official recommendation is to replace the entire motor unit when axle play occurs.
BlackBearing offer an alternative!$32.50 (RRP)Add To Cart
