Chris King Driveshell Conversion HG
Description
Convert your existing Chris King mountain hub to Micro Spline with a new driveshell.
- Compatible with all ISO or Centerlock mountain rear hubs with twin-bearing axles.
- Installation requires a T10 Torx and Park Tool FR-1.3 (or equivalent)
- Refer to the Boost Centerlock Service Video for driveshell removal and installation instructions.
If you have an ISO hub with a needle-bearing axle & driver, you will need a Twin-Bearing Conversion Kit.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMWA-AXLE-01Stock Code:WMWA-AXLE-03Stock Code:WMWA-AXLE-04Stock Code:WMWA-AXLE-06Stock Code:WMWA-AXLE-08Stock Code:WMWA-AXLE-09Stock Code:WMWA-AXLE-10Stock Code:WMWA-AXLE-11Stock Code:WMWA-AXLE-12Stock Code:WMWA-AXLE-13Stock Code:WMWA-AXLE-14Stock Code:WMWA-AXLE-15Stock Code:WMWA-AXLE-17Stock Code:WMWA-AXLE-18Stock Code:WMWA-AXLE-19Stock Code:WMWA-AXLE-20Stock Code:WMWA-AXLE-29Stock Code:WMWA-AXLE-33Stock Code:WMWA-AXLE-35
Wheels MFG Axle-01 Rear Quick Release 137x10x1mm Shimano Compatible
• Fits many Shimano / Japanese rear hubs
• Thread Pitch: 10mm x 1
• Length: 137mm
• Hollow Axle
• 1 axle per bag
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP)$75.00 (RRP) -
Stock Code:WTWAF-AXL12-120-150-BLKStock Code:WTWAF-AXL12-125-150-BLKStock Code:WTWAF-AXL12-122-175-BLKStock Code:WTWAFA15-100-FXStock Code:WTWAFA15-100-SRStock Code:WTWAAXLE15-110-FXStock Code:WTWAAXLE15-110-FX-GRNStock Code:WTWAAXLE15-110-FX-REDStock Code:WTWAFA15-110-FXStock Code:WTWAFA15-110-FX-BLUStock Code:WTWAFA15-110-FX-ORGStock Code:WTWAAXLE15-110-SR-PRPStock Code:WTWAFA15-110-SRStock Code:WTWAFA15-110-SR-REDStock Code:WTWAAXLE15-150-SRStock Code:WTWAFA15-150-SR
Looking for a front axle that is easy to use, lightweight and looks great? Wolf Axle is the perfect fit. Available in a variety of colors and standard or Boost spacing. Easily installed with a 6 mm hex key.
Unlike other similar products, Wolf Axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles.
Always apply a small amount of grease to the washer and threads when installing.
Compatibility
- Fox suspension forks
- 100 mm (standard) or 110 mm (Boost) with the below exceptions
- Not compatible with 2021 Fox F36 and F38 forks
- Similar to Fox Kabolt axle but with more color choices and beautiful Wolf Tooth design.$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$53.02 (RRP)$83.95 (RRP)$83.92 (RRP)$94.43 (RRP)$94.43 (RRP) -
Stock Code:CKWA-PHB774B
Conversion kit for Chris King ISO hubs to XD using new internals and axle from the new C/L Boost hubs.
Includes freehub and bearings, axle, and adjusting clamp. Can be used in C/L Boost hubs without the adjusting clamp.$403.00 (RRP)Add To Cart
-
Stock Code:PCWA-190BKORStock Code:PCWA-190BLACKStock Code:PCWA-190POLISHStock Code:PCWA-190PUBKStock Code:PCWA-190PWBKStock Code:PCWA-190SILVERStock Code:PCWA-190SIORStock Code:PCWA-191BKORStock Code:PCWA-191BLACKStock Code:PCWA-191POLISHStock Code:PCWA-191PUBKStock Code:PCWA-191PWBKStock Code:PCWA-191SILVERStock Code:PCWA-191SIORStock Code:PCWA-199BKORStock Code:PCWA-199BLACKStock Code:PCWA-199PEWTERStock Code:PCWA-199POLISHStock Code:PCWA-199PUBKStock Code:PCWA-199SILVERStock Code:PCWA-199SIOR
A thoroughly modern take on the traditional internal cam Quick-Release skewer.
The stainless steel shaft screws into the 7075 aluminum head, which is oval, putting the material where it’s needed and not where it isn’t. The handles are a stainless steel/aluminum affair for a good balance of ergonomics and weight savings.
The nuts have a nice matching O-ring and a thread friction element to keep them in place after the wheels are removed.
Order the skewer length that matches your hub’s width.$256.00 (RRP)$256.00 (RRP)$340.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$340.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$512.00 (RRP)$512.00 (RRP)$512.00 (RRP)$681.00 (RRP)$512.00 (RRP)$512.00 (RRP)$512.00 (RRP)
