Wheels MFG Seatpost Shaft Block
Description
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components specifically bike dropper seat posts during service. Designed with strong magnet inserts to keep the shaft clamps securely in place when used with a vice clamp.
Includes 1 pairs of of shaft clamps to fit shaft diameters
30.9mm
31.6mm
34.9mm
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-TIE-REUS
Wheels MFG Zip Ties Reuseable bag x 100 pieces
Reuseable zip ties, black
•200mm long x 4.8mm wide
•100 pieces$61.00 (RRP)Add To Cart
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:PDTL6460701
Checking your chain for wear is one of the simplest things any cyclist can do to maintain drivetrain performance and minimize maintenance costs. The Pedro's Chain Checker Plus II makes this task quick and easy offering a simple check of 0.5% and 0.75% chain wear. To ensure the maximum life from your chain and accuracy of measurement, the tool employs a three-point design which properly isolates pin wear from roller wear. Other two-point designs do not and can incorrectly indicate a worn chain, robbing the user of additional miles and money. The Chain Checker Plus II also includes a chain hook tool, perfect for simplifying chain removal and installation, and a chainring nut wrench, essential for removal and installation of chainrings. Works on 1-13 speed chains. Chain wear tool approved by SRAM for use on EAGLE 12-speed and Flattop chains.
Precision laser cut design accurately measures 0.5% and 0.75% chain wear.
Three point chain wear tool design properly isolates pin wear from roller wear.
Chain hook tool and chainring nut wrench add functional versatility and value.
Chain wear tool approved by SRAM for use on EAGLE 12-speed and Flattop chains.$30.00 (RRP)Add To Cart
-
Stock Code:RLTL-APC50-2
APC50-2 - Syringe Cap | Loobtoob Pro 50ml
Mobile storage that contains any unwanted mess, Fits 1 Loobtoob Pro 10ml with applicator when not in use.
Fits one Loobtoob Pro 50ml with applicator attached.
3d Printed In House - PETG Prusament.
Contains mess during transportation.
Protects applicator from contaminants and damage.
Fits over syringe and applicator.
DOES NOT FIT BASIC OR ARDES SYRINGES
SYRINGE AND CLIP NOT INCLUDED
NOTE: 3D Printed parts vary in resolution quality and may contain small surface imperfections. This is unavoidable but does not impact cap performance.$16.00 (RRP) -
Stock Code:ABTL-CHNWHP-5
A chain whip is a pretty simple tool, but the Whip-It maximizes function and simplicity. The Whip-It is made from a 12" length of stainless steel to give you enough leverage to loosen even the most stubborn cassettes. The Whip-it's round handle provides comfort surpassing other flat bar style chain whips on the market. The icing on the cake is that Abbey's signature tool, the Crombie(sold separately)stores inside the handle of the Whip-It! This means the two tools you use together, get stored together, and travel together, giving you less clutter in your tool box.
The Whip-It comes in two versions, one for the 1/2" handle for all Crombies that Abbey makes as of January 2020, this version also works for dual sided and team issue before January 2020. There is also a version for the older 3/8 handle single sided chain whips which were sold prior to January 2020.
Made in Bend Oregon.$91.00 (RRP)Add To Cart
