Salsa Guide 35.0 Carbon Bar 800x20mm
Description
Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence.
- Unidirectional carbon fiber construction
- 35.0 mm bar clamp diameter
- 8-degree back sweep with 5-degree up sweep
- 800 mm width with marked lines for easy trimming to desired width
- Tested to ASTM 4 for extreme off-road riding with drops up to 48 inches
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SMHB27544Stock Code:SMHB27548Stock Code:SMHB27556Stock Code:SMHB27527Stock Code:SMHB27540Stock Code:SMHB27541Stock Code:SMHB27546Stock Code:SMHB27549Stock Code:SMHB27550Stock Code:SMHB27553Stock Code:SMHB27554Stock Code:SMHB27524Stock Code:SMHB27525
Road bar with a round compact bend and shallow drop. Shape makes it easy to get into a natural position in the drops and brake levers are within easy reach.
- 6061-T6 aluminum
- Drop: 130mm
- Reach: 75mm$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP) -
Stock Code:TNHB-HB-E107
Our road bar features a mild wing shape on top, clamping area wide enough for aero bars, mid-compact reach and drop. This is the modern bar for the modern road bike. Our Road bar wing section is small enough not to restrict hand movement when riding on the top and allows bar angle adjustment with out “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
1.5K woven impact ends help prevent damage to uni-directional fibers from impact.
Reach 78.5mm.
Drop is proportional. Road drops are: 40CM 137mm, 42CM 140mm, 44CM 140mm, 46CM 143mm$390.00 (RRP)Add To Cart
-
Stock Code:SAHB-HB8330
Whatever your adventure, Salt Flat Handlebars are lightweight, comfortable, and durable. Whether racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let‘r rip!
- Unidirectional carbon fiber construction
- Graduated lines for easy trimming
- 31.8mm clamp diameter with 140mm width for use with Salsa Anything Cradle and aerobars
- Signature 11 deg back, and 6 deg up sweep with zero rise
- Note: Salt Flat bars are not compatible with bar ends$302.82 (RRP)POA -
Stock Code:SMHB278021Stock Code:SMHB278022
Riser bar with extra bend, but a low rise. Not as much bend as Soma's original Dream Riser, but enough so grips don't get in the way of large bar bags.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 25mm
– Backsweep: 20 degrees
– Upsweep: 5 degrees
– Weight: 425g$214.00 (RRP)$214.00 (RRP) -
Stock Code:SMHB27098
Here is your alternative to "alternative drop bars". It's wide and takes MTB grips as well as bar tape. The grip area is long; long enough to run grip shifters (including Rohloff) and flat bar levers. But the Gator will also take aero levers just like the Junebug. Try it bikecamping, offroading, or touring.
- 6061 butted aluminum
- Width: 655mm at ends, center-to-center
- Width: 505mm at front of drops, center-to-center
- Width of flats on top: 340mm
- Center: 31.8mm
- Drops flare out at 20° angle
- Drops are 190mm long and have an OD of 22.2 (i.e. they can take flat bar grips)
- Reach: 65mm / Drop: 112-160mm
(Reach and drop is relative to the angle you install these bars at. On these types of bars, you want to angle the drops down, not have them parallel to the ground as with road bars)
- Weight: 400g
- No cable grooves
- Shotpeen finish$214.00 (RRP)
