Wheels MFG Bearing Drift Set Support Kit
Description
This drift and over axle set is used to install less common-sized thru-axle and frame sealed bearings.
Compatible with the 3/8 Wheels Mfg. BP0001, BP0005, Press 1 handles and rod.
Originally Driftset-Hub1
Contains the following Open Bore Drift sizes:
(2) 6000 Open Bore
(2) 6001 Open Bore
(2) 6002 Open Bore
(2) 6003 Open Bore
(2) 6801 Open Bore
(2) 6805 Open Bore
(2) 6900 Open Bore
(2) 6904 Open Bore
(2) 17x28 Open Bore
Contains the following Over Axle Drift sizes:
(2) 6000 Over Axle
(2) 6001 Over Axle,
(2) 6002 Over Axle,
(2) 6003 Over Axle
(2) 6900 Over Axle,
Contains the following speed spacers:
(2) Frame Linkage Standoff 20
(2) Frame Linkage Standoff 30
(2) Speed Spacer 30mm
(1) Speed Spacer 15x25
(1) Speed Spacer 15x35
(1) Speed Spacer 17x25
(1) Speed Spacer 17x35
(1) Speed Spacer 20x25
(1) Speed Spacer 20x35
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Expected Date:07 May 2026Expected Date:07 May 2026Expected Date:07 May 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WMTL-E-BIKESOCKET05Stock Code:WMTL-E-BIKESOCKET03Stock Code:WMTL-E-BIKESOCKET02Stock Code:WMTL-E-BIKESOCKET06Stock Code:WMTL-E-BIKESOCKET01Stock Code:WMTL-E-BIKESOCKET04Stock Code:WMTL-E-BIKESOCKET10Stock Code:WMTL-E-BIKESOCKET09Stock Code:WMTL-E-BIKESOCKET07Stock Code:WMTL-E-BIKESOCKET08
Compatible with 60mm Gen 1 Bosch Lockring.
Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red.Expected Date:07 May 2026Expected Date:07 May 2026$72.00 (RRP)$81.00 (RRP)$81.00 (RRP)$81.00 (RRP)$96.00 (RRP)$100.00 (RRP)$81.00 (RRP)$52.00 (RRP)$72.00 (RRP)$72.00 (RRP) -
Stock Code:PDTL6460631
Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1 percent and is then tested 5 times prior to packaging with results recorded on the product card along with the date.
Infinite torque-limiting clutch design eliminates over-torquing.
Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included.
Ergonomic handle design provides comfort and control and stores extra bits.$75.00 (RRP)Add To Cart
-
Stock Code:PDTL6461002
Each Pro Cone Wrench is laser cut to precise tolerances from 2mm thick tool steel to ensure perfect fit, then optimally heat-treated for a lifetime of service not found in other "shop quality" cone wrenches. Each wrench features a single-ended design with a new molded TPR rubber cushioned grip to provide maximum comfort & control. A new 3/8" square drive allows use with torque wrenches for proper adjustment of modern hubs.
- Precision laser cut design with ergonomic cushioned TPR grip and 3/8" drive for use with torque wrenches.
- Superior material and optimized heat treatment outlast the competition.
- Set includes two each of 13, 14, 15, 16, 17, and one each of 18, 19, 20, 21, 22, 23, 24, 26, and 28mm sizes.$430.00 (RRP)Add To Cart
-
Stock Code:ABTLABTSHOPHAM
The Shop Hammer has a heat treated 1.5" (38mm) stainless steel head and 12" long handle with the same silicone grip from ESI as our Team Issue Hammer. Weighing in at a respectably stout 22.85oz (648g) they are sure to make short work of setting crown races and removing press fit bottom brackets.
Hammer comes standard with green soft face.
Made in Bend Oregon$206.00 (RRP)Add To Cart
