Wheels MFG 12mm Sealed Bearing Extractor
Description
Individual extractor for removing 6001, 6801 & 6901 sealed bearings with 12mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-DS-KIT
Wheels MFG Dropout Saver Kit 6 piece
The Dropout Saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads and install a Dropout Saver and realign the dropout.
Kit includes (1) 15/32" drill bit, (2) DS-1 wide, and (3) DS-2 narrow dropout saversStock Level:Out Of StockStock Level:Out of Stock$100.80 (RRP) -
Stock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Our 2437 open bore adapter is used to press 24x37 sealed bearings in to Shimano compatible bottom bracket cups, and direct fit frames like Trek BB90. The adapter is machined with one step at 24mm OD, which fits in to the center of the sealed bearing.
Use with 24x37x7 bearing
Outer Diameter: 37mm
Inner Step Diameter: 24mm
Inner hole sized to fit 3/8" threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, anodized gray aluminum
Sold individuallyStock Level:In StockStock Level:In StockStock Level:1Stock Level:1Stock Level:1Stock Level:In StockStock Level:In StockStock Level:In StockStock Level:2Stock Level:Out of StockStock Level:1Stock Level:2Stock Level:2Stock Level:Out of StockStock Level:2Stock Level:In StockExpected Date:29 July 2024$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:WTTLMLCP-BLK-ORG
The patent-pending Pack Pliers is a multi-tool developed to provide functions that are not found on a typical multi-tool and it is light and compact so you can carry it with you. This tool serves as a tire lever, Presta valve core remover, valve stem lock nut wrench and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self closes the tool.
Compatibility
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storge is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
- Tire lever not recommended for use on carbon rims
Weight: 38.5g
Size: 116 mm x 20 mm x 9 mm
Material: 7075-T6 aluminum
Master links are not includedStock Level:In StockStock Level:In Stock$56.00 (RRP)Add To Cart
-
Stock Code:WMTL-BP0022
Similar to its big brother but at a fraction of the size. The new and more efficient Adjustable Press Stop Mini will make life easier for mechanics as it allows for quick and accurate positioning in places where space is tight at the press of a button.
The Adustable Press Stop slides along 3/8" ACME threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings.
Product Details:
Compatible with new and existing Wheels MFG press kits which are sold separately including:
Press-4
ST0006
Press-1
Machined aluminum body
Anodized in Wheels MFG red.
Durable steel button
For use with 3/8" ACME threaded press rod (Sold Separately)Stock Level:Out Of StockStock Level:Out of StockExpected Date:29 July 2024$94.50 (RRP) -
Stock Code:WMTL-E-BIKESOCKET07
Compatible with Bafang Inner M33 Lockring.
Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red.Stock Level:Out Of StockStock Level:Out of StockExpected Date:29 July 2024$52.50 (RRP)