Wolf Tooth Encase Bacon Strips x15
Description
Plug holes in your bicycle tire with a bacon strip and get back on the road or trail. These bacon strips are just the right size to avoid enlarging the puncture while plugging the hole. Roll them and store in the handle of the EnCase® System Chain + Tire Plug Multi-Tool.
There are 15 bacon strip plugs sold in this set.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WTTLPACKWRENCH
This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end (also often used for centerlock rotors). The 1-inch hex end features magnets that quickly couple with our steel hex insert tools. The side of the tool has a chainline measurement ruler.
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools. To help with this, we developed some very specific "Pack Tools" that are high quality but weight conscious for those who perform mobile wrenching, travel with their bike, or just want one set of tools that can be thrown in when heading to the trail.
** Includes the wrench only. Steel inserts are not included but can be purchased separately or as a set.
- 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts.
- 16 notch 44 mm bottom bracket tool (or center lock rotor tool) compatibleStock Level:In StockStock Level:In Stock$88.84 (RRP)Add To Cart
-
Stock Code:WTTL-AXLE-TOOL-GLD
The Wolf Tooth Axle Handle Multi-Tool is a minimalist, lightweight option to cover 10 essential tool functions. It is stored at the end of a Wolf Tooth rear axle during rides as a multi-tool that is easy to access for quick adjustments and trailside fixes.
An O-ring on the inside of the axle’s threaded end locks the Axle Handle Multi-Tool in place so it is secure while riding. On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for double-sided hex bits that nest on the inside of the handle via magnet. It was designed for Wolf Tooth axles, though is compatible on other axles that have a threaded end.
Four hex bits are included with the Axle Handle Multi-Tool. Two bits can then be selected to be stored in the back of the tool based on the functions that you use the most. Each bit has two functions. So if you find yourself frequently reaching for the 4mm hex on a multi-tool in your frame bag, the Axle Handle Multi-Tool makes it quickly available and always within reach, without needing to unpack your tool wrap on the trail.
- Four hex bit options are included, allowing the cyclist to select functions most frequently used: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible
- Designed for Wolf Tooth rear axles with a female threaded head-end but also compatible with axles from Trek and other manufacturers that have a removable handle retained with an o-ring"
- Available in eight colors to match other Wolf Tooth anodized components and accessories
- Designed, engineered, and machined at Wolf Tooth in Minnesota with 6061-T6 aircraft-grade aluminum
Compatibility
- Designed for Wolf Tooth rear axles with a female threaded head-end but also compatible with axles from Trek and other manufacturers that have a removable handle retained with an o-ring"Stock Level:Out Of StockStock Level:Out of Stock$73.50 (RRP) -
Stock Code:WMTL-BP0022
Similar to its big brother but at a fraction of the size. The new and more efficient Adjustable Press Stop Mini will make life easier for mechanics as it allows for quick and accurate positioning in places where space is tight at the press of a button.
The Adustable Press Stop slides along 3/8" ACME threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings.
Product Details:
Compatible with new and existing Wheels MFG press kits which are sold separately including:
Press-4
ST0006
Press-1
Machined aluminum body
Anodized in Wheels MFG red.
Durable steel button
For use with 3/8" ACME threaded press rod (Sold Separately)Stock Level:1Stock Level:1$94.50 (RRP)Add To Cart
-
Stock Code:WMTL-ST0007
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components specifically bike dropper seat posts during service. Designed with strong magnet inserts to keep the shaft clamps securely in place when used with a vice clamp.
Includes 1 pairs of of shaft clamps to fit shaft diameters
30.9mm
31.6mm
34.9mmStock Level:1Stock Level:1$160.00 (RRP)Add To Cart
-
Stock Code:WMTL-PRESS-7-PRO
Designed to press in all current Wheels Mfg bottom brackets!
Professional, shop-quality, version of our Universal Bottom Bracket Press, but with larger handles and brass inserts in the handle faces. Easy to use, this tool is made up of two machined aluminum handles, 1/2" threaded rod and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed in the Compatibility tab below.
No more searching for the correct size drifts and parts. Just match up the drift to your frame's BB shell size and your bottom bracket's bearing size and press. 1/2" diameter threaded rod resists bending, allowing for the cups to align and press in straight.
Drifts can also can be used as a frame bottom bracket shell sizing guide!
- Machined aluminum handles and drifts
- Brass inserts in the tool faces allow each handle to turn freely against drifts
- Red anodized drifts and handles
- Steps on drift are marked with diameter sizes
- Zinc-plated 1/2" diameter threaded rod
- Works with BB shells up to 132mm wide
- Includes two Universal BB Drifts.Stock Level:1Stock Level:1$168.00 (RRP)Add To Cart