Wolf Tooth 8-Bit Tyre Lever RimDent Tool
Description
The 8-Bit Tire Lever + Rim Dent Remover Multi-Tool has two functions. A slender, ergonomic plastic tire lever is on one end opposite of a machined aluminum rim dent remover. The tire lever will work with all tubed and tubeless tires, while the rim dent remover is compatible with all metal rims.
This multi-tool is designed to work on its own or be grouped with other 8-Bit System multi-tools. All three multi-tools nest together via magnets and clever machining. The 8-Bit Tire Lever + Rim Dent Remover Multi-Tool will pair with both or either other 8-Bit System multi-tools. These were designed to solve most trailside fixes to get you back to the trailhead or next town. They are strong, versatile, lightweight, and small enough to fit in a jersey pocket or riding tool wrap.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Our 2437 open bore adapter is used to press 24x37 sealed bearings in to Shimano compatible bottom bracket cups, and direct fit frames like Trek BB90. The adapter is machined with one step at 24mm OD, which fits in to the center of the sealed bearing.
Use with 24x37x7 bearing
Outer Diameter: 37mm
Inner Step Diameter: 24mm
Inner hole sized to fit 3/8" threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, anodized gray aluminum
Sold individuallyStock Level:In StockStock Level:In StockStock Level:1Stock Level:2Stock Level:1Stock Level:In StockStock Level:In StockStock Level:In StockStock Level:2Stock Level:1Stock Level:1Stock Level:In StockStock Level:2Stock Level:1Stock Level:2Stock Level:In Stock$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-609-EXT
Individual extractor for removing 609 & 9227 sealed bearings with 9mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.Stock Level:2Stock Level:2$49.35 (RRP)Add To Cart
-
Stock Code:WTTL-6-BIT-KR-BLK
The new Wolf Tooth 6-Bit Hex Wrench is a slim, strong multi-tool with 11 functions for common bike repairs and everyday needs. Six hex bits are stored inside the handles that fit into the end of a ball detent swivel head for use. The 11 functions include: 2, 2.5, 3, 4, 5, 6, and 8mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible bits. All bits are ED-coated and corrosion-resistant. It is small enough to fit into a riding tool wrap or pocket, and has an optional keyring attachment to fit on any keychain for use away from the bike.
The keyring attachment is an option for those who like to have a multi-tool on or off the bike for everyday-carry needs. The 6-Bit Hex Bit Wrench is locked shut while the keyring is attached. This prevents it from opening while you’re on the go. Then when you need to use the multi-tool, press the end of the keyring attachment to detach it from your keyring. When you’re done using it, close the handles and click it back onto the keyring attachment to lock it shut once again. The handles also have a magnetic closure to keep it closed when the keyring attachment is not connected.
• All bits are ED-coated and corrosion-resistant
• Magnets keep all bits in place and secure
• Ball detent swivel head tested to over 40Nm of torque
• Same bits as 8-Bit System and EnCase System multi-tools
• Optional ball detent keychain locks multi-tool closedStock Level:In StockStock Level:In Stock$99.00 (RRP)Add To Cart
-
Stock Code:WMTL-E-BIKESOCKET08
Compatible with Bafang Outer M33 lockring.
Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red.Stock Level:2Stock Level:2$52.50 (RRP)Add To Cart
-
Stock Code:WMTL-TL9002
E-bike Hub Drive Cassette Socket Bafang
E-bikes are here to stay! Designed to save the mechanic time and money, our new e-bike sockets are machined to match manufacturer specifications.
The E-bike Hub Drive Cassette Socket is used installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring.
- 8620 Steel
- Zinc finishStock Level:2Stock Level:2$69.00 (RRP)Add To Cart