IRD

IRD BB Cups English Pair

- Retrofit IRD QB-55 or QB-75 bottom brackets to work with Englisg threaded frames
- Fits on Sugino CBB-F103
- May work with Tange-Seiki, and other BB brands as well

IRD BB Cups Italian Pair

- Retrofit IRD QB-55 or QB-75 bottom brackets to work with Italian threaded frames
- Fits on Sugino CBB-F103
- May work with Tange-Seiki, and other BB brands as well

IRD BB QB75 68 ( Eng ) or 70 ( It ) x103 square tape
Please specify if you want English or Italian cups.

The MCX Max TA is a monster cross/gravel carbon fork with clearance to fit 29 x 2.1" tires and 27.5" x 2.25" tires. Extra long 350mm aluminum steerer (Most carbon forks have steerers only 280-300mm long)

(There is also two lighter MCX models that have straight 1-1/8" steerers and is available in QR or thru-axle. )

– Axle to crown: 406mm
– Rake: 50mm
– 15mm thru-axle w/QR
– Brake mount: Flat mount disc
– Internal cable routing
– Triple accessory bosses
– Single set of fender eyelets
– Steerer: Aluminum, 1-1/8"-1-1/4" tapered x 350mm
– Weight: 970g (including thru-axle and extra long uncut steerer)
– Matte Black finish

The MCX QR is a monster cross/gravel carbon fork with clearance to fit 700 x 50mm tires and 27.5" x 2.1" tires

(The MCX also comes in thru-axle configuration. There is an MCX Max model that is burlier with tapered steerer, thru-axle, and even more tire clearance)

– Axle to crown: 406mm
– Rake: 50mm
– QR hub dropout
– Brake mount: Flat mount disc
– Triple accessory bosses
– Single set of fender eyelets
– Steerer: Aluminum, 1-1/8" x 350mm
– Weight: 760g
– Matte Black finish

The MCX TA is a monster cross/gravel carbon fork with clearance to fit 29 x 2.0" tires and 27.5" x 2.1" tires. Extra long 350mm steerers fit most 62+cm frames

(The MCX also comes in a configuration for standard QR hubs. There is an MCX Max model that is burlier with tapered steerer, thru-axle, and even more tire clearance)

– Axle to crown: 406mm
– Rake: 50mm
– 15mm thru axle w/QR
– Brake mount: Flat mount disc
– Triple accessory bosses
– Single set of fender eyelets
– Steerer: Aluminum, 1-1/8" x 350mm
– Weight: 870g (Including thru-axle and uncut steerer)
– Matte Black finish

IRD CrMo Lugged Fork Rake 45mm

- Lugged construction with sloping crown.
- Eyelets at fork tips; braze-ons for low-rider panniers.
- Lots of tire clearance. (374mm axle to crown)
- Designed for longer reach brake calipers.
- Rake 43mm.
- 1-1/8" CrMo steerer.
- Black

IRD Metawire Brake Set Black

IRD Mosaic Carbon Fork Aluminum Steerer 1-1/8in. 45mm Rake

-Curved blade carbon fork with alloy crown. Fits short reach(39mm-49mm) caliper brakes
- 368mm axle to crown
-Options: 1-1/8" carbon steerer,
1-1/8" alloy steerer or 1" CrMo steerer

Quick release downtube cable housing stops allow you to easily lubricate shift housing without unbolting them from the frame. Machined barrel adjusters offer precise, ergonomic adjustments on the stand or on the road. Mounts to downtube shifter bosses. Sold as a pair.

IRD Snap Link 3 10 Speed Campy Compatible chain joining link

With this link in place you can make your chain removable for easy cleaning or whatever.

- The 9-speed version is compatible with Shimano 9-spd and IRD 9-spd chains.

- The Campy 10 version is compatible with pre-2006 Campy chains and works also with the IRD 10-speed chains.

-The Shimano 10 version is strictly for Shimano.

-The Campy 11 version is strictly for Campy 11

A seatpost designed to help enhance seat adjustability on either saddles with very short rails or frames that are a little too small.
Allows your saddle to be set back 50mm...almost 2 inches.

- Aluminum head and rocker
- Single bolt design
- Tange Prestige CrMo shaft
- 250 or 300mm long
- Black or silver anodized
- Wt.: 420g (250mm)
- ONLY in 27.2mm OD presently

A seatpost designed to help enhance seat adjustability on either saddles with very short rails or frames that are a little too small.
Allows your saddle to be set back 50mm...almost 2 inches.

- Aluminum head and rocker
- Single bolt design
- Tange Prestige CrMo shaft
- 250 or 300mm long
- Black or silver anodized
- Wt.: 420g (250mm)
- ONLY in 27.2mm OD presently

A seatpost designed to help enhance seat adjustability on either saddles with very short rails or frames that are a little too small.
Allows your saddle to be set back 50mm...almost 2 inches.

- Aluminum head and rocker
- Single bolt design
- Tange Prestige CrMo shaft
- 250 or 300mm long
- Black or silver anodized
- Wt.: 420g (250mm)
- ONLY in 27.2mm OD presently