Wolf Tooth Remote with 22.2mm Clamp
Description
ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever.
Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category.
- UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration.
- Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation.
- Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.
- Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.
- Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.
- Breakaway axle pivot: Crashes are bad- but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here.
- High-traction lever: A machined surface ensures that control is not lost- even in the worst of conditions.
- Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details.
- Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.
Compatibility
- Compatible with all cable actuated dropper posts.
- Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post.
- If your post is not listed in the charts below, measure the pivot center to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.
- ReMote for Magura is compatible with the 2-bolt clamp SRAM brakes that do not feature Matchmaker X clamps.
- ReMote for Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Our ReMote is designed to work with the early model of the Tech 3 brake levers. The newer model of the Tech 3 brakes has a threaded hole and will require some modifications to our ReMote base.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WTRL-REMOTE-DRPBAR
ReMote Drop Bar is a new dropper lever option for gravel bikes, drop bar mountain bikes, road bikes, and any other bike with drop bars. It can be actuated while riding on the hoods or in the drops thanks to refined ergonomics and a longer lever for easier access. Two 11mm diameter Enduro ball bearings are used at the pivot point for smooth actuation. This arrangement of bearings adds durability to the design, eliminates play, and allows for a smaller assembly compared to similar dropper levers. The machined clamp is positioned on the outside of the handlebars, which allows for the base to be closer to the bars, creating an assembly with a lower profile than competitors.
• Compatible with all cable-actuated dropper posts on bikes with drop bars
• Complete CNC-machined assembly
• Outboard clamp orientation does not interfere with hand placement
• Cable management pocket keeps cable end tucked away and out of sight
• Replacement parts available
INCLUDES
24mm clamp - standard drop bar diameter
Cable not included$126.69 (RRP)Add To Cart
-
Stock Code:PCRL-723BLACKStock Code:PCRL-723BLUEStock Code:PCRL-723GOLDStock Code:PCRL-723ORANGEStock Code:PCRL-723PEWTERStock Code:PCRL-723PINKStock Code:PCRL-723POLISHStock Code:PCRL-723PURPLEStock Code:PCRL-723REDStock Code:PCRL-723SILVERStock Code:PCRL-726BLACKStock Code:PCRL-726BLUEStock Code:PCRL-726GOLDStock Code:PCRL-726ORANGEStock Code:PCRL-726PEWTERStock Code:PCRL-726PINKStock Code:PCRL-726POLISHEDStock Code:PCRL-726PURPLEStock Code:PCRL-726REDStock Code:PCRL-726SILVER
Paul set out to make the toughest, most precisely machined, most adjustable dropper trigger on the market. After numerous prototypes and over a year of testing, they are proud to present a dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp.
- Machined by Paul in sunny Chico California to the highest tolerances.
- A pinch bolt and cable head recess allowing you to run the cable in either direction.
- Dual stacked sealed cartridge bearings in the pivot for zero slop and long (serviceable) life.
- A hinged clamp so you can install it without removing the grip.
- Barrel adjuster for fine tuning the cable tension.$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$306.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$306.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP) -
Stock Code:PCRL-723BLACKStock Code:PCRL-723BLUEStock Code:PCRL-723GOLDStock Code:PCRL-723ORANGEStock Code:PCRL-723PEWTERStock Code:PCRL-723PINKStock Code:PCRL-723POLISHStock Code:PCRL-723PURPLEStock Code:PCRL-723REDStock Code:PCRL-723SILVERStock Code:PCRL-726BLACKStock Code:PCRL-726BLUEStock Code:PCRL-726GOLDStock Code:PCRL-726ORANGEStock Code:PCRL-726PEWTERStock Code:PCRL-726PINKStock Code:PCRL-726POLISHEDStock Code:PCRL-726PURPLEStock Code:PCRL-726REDStock Code:PCRL-726SILVER
Paul set out to make the toughest, most precisely machined, most adjustable dropper trigger on the market. After numerous prototypes and over a year of testing, they are proud to present a dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp.
- Machined by Paul in sunny Chico California to the highest tolerances.
- A pinch bolt and cable head recess allowing you to run the cable in either direction.
- Dual stacked sealed cartridge bearings in the pivot for zero slop and long (serviceable) life.
- A hinged clamp so you can install it without removing the grip.
- Barrel adjuster for fine tuning the cable tension.$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$306.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$306.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)
