Wolf Tooth Boostinator DF2
Description
Boostinator DF2
TheBoostinatorDF2 is compatible with DT-Swiss 2011 and newer 15x100mm 240s front hubs.
Use DF-20 for 240s Oversize (20mm convertible) hubs. These hubs have a threaded non-disc side endcap that has little wrench flats on it
Centerlock hubs are supported
The Boostinator DF2 is also compatible with some complete DT Swiss Spline One front wheels. Click here for a compatibility table
Net weight: 6g
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKWA-PHB557Stock Code:CKWA-PHB559Stock Code:CKWA-PHB558Stock Code:CKWA-PHB556Stock Code:CKWA-PHB580Stock Code:CKWA-PHB708Stock Code:CKWA-PHB708BStock Code:CKWA-PHB571Stock Code:CKWA-PHB505Stock Code:CKWA-PHB506Stock Code:CKWA-PHB544Stock Code:CKWA-PHB525Stock Code:CKWA-PHB545Stock Code:CKWA-PHB508Stock Code:CKWA-PHB510Stock Code:CKWA-PHB581Stock Code:CKWA-PHB536
Select from side bar
Chris King Rear 135x10mm QR ISO Disc hub Axle (classic disc) 1 piece.
DOES NOT INCLUDE QR end caps or fun bolts. These must be purchased separately.
Use PHB705 if QR needed
Use PHB507 for Fun bolts
• Fits Chris King ISO Rear Hubs (not compatible with 150mm, 157mm, BOOST or Singlespeed Hubs).
• Replacement for 2-piece Axle and allows you to change any bolt on axle to a QR Axle.Expected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$61.72 (RRP)$61.72 (RRP)$26.21 (RRP)$32.91 (RRP)$32.91 (RRP)$161.28 (RRP)$153.06 (RRP)$306.11 (RRP)$161.28 (RRP)$286.36 (RRP)$440.00 (RRP)$34.97 (RRP) -
Stock Code:WTWAAXLE15-110-FX-PRPStock Code:WTWAFA15-110-FX-PRP
Looking for a front axle that is easy to use, lightweight and looks great? Wolf Axle is the perfect fit. Available in a variety of colors and standard or Boost spacing. Easily installed with a 6 mm hex key.
Unlike other similar products, Wolf Axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles.
Always apply a small amount of grease to the washer and threads when installing.
Compatibility
- Fox suspension forks
- 100 mm (standard) or 110 mm (Boost) with the below exceptions
- Not compatible with 2021 Fox F36 and F38 forks
- Similar to Fox Kabolt axle but with more color choices and beautiful Wolf Tooth design.$78.96 (RRP)$78.96 (RRP) -
Stock Code:CKWA-PHB786B
Convert your ISO B rear hub to our updated twin-bearing axle and driveshell. Conversion kits come complete with 148x12mm axle, adjustment clamp, and driver. Driveshell internals are pre-installed for a hassle free swap.
- Compatible with ISO B rear hubs - serial numbers start with 851.
- Requires a 2.5mm hex bit for installation.$508.55 (RRP)Add To Cart
-
Stock Code:WMWA-FTA-15-158-1.5
Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.
Product features:
- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles
Tech Specs:
- Material: 7075 aluminum
- Hard anodized
- Diameter: 15mm
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA$75.00 (RRP)Add To Cart
