Wolf Tooth EnCase Replacement Chain Pin
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WTTLENCASE-HEX-BITSStock Level:In StockStock Level:In Stock$39.43 (RRP)
Add To Cart
-
Stock Code:WMTL-6806-EXT
Individual extractor for removing 6806 sealed bearings with 30mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.Stock Level:2Stock Level:2$49.35 (RRP)Add To Cart
-
Stock Code:WTTL-8BIT-BLK-BLK
The 8-Bit Pack Pliers is a lightweight multi-tool with 17 functions. Eight attachments nest inside the handles of master link pliers using magnets and a clever storage system. These attachments then fit into an 8mm ball detent swivel head that has a 4mm opening for hex bits, which adds functionality to the already-versatile master link pliers. This new multi-tool was created to solve almost any minor repair on MTB and road rides alike.
- 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut
- Magnets keep all bits in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar for extra torque when head is bent
- 8mm hex bit tested to over 40 Nm torque
Compatibility
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)Stock Level:In StockStock Level:In Stock$136.50 (RRP)Add To Cart
-
Stock Code:WMTL-ST0007
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components specifically bike dropper seat posts during service. Designed with strong magnet inserts to keep the shaft clamps securely in place when used with a vice clamp.Ā
Includes 1 pairs of of shaft clamps to fit shaft diameters
30.9mm
31.6mm
34.9mmStock Level:1Stock Level:1$160.00 (RRP)Add To Cart
-
Stock Code:WMTL-SS-30Stock Code:WMTL-SS-15-25Stock Code:WMTL-SS-17-25Stock Code:WMTL-SS-17-35
Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. 15mm thru hole size makes this perfect for use on hubs with larger axles.
Compatible with:
PRESS-4 - Economy Press
PRESS-1 - Large Sealed Bearing Press
PRESS-1 Handle & Rod Assembly
Length: 25mm
OD: 23.8mm
ID: 15.1mm
Machined Aluminum
*Sold individuallyStock Level:In StockStock Level:In StockStock Level:In StockStock Level:In StockStock Level:Out of Stock$15.75 (RRP)$21.00 (RRP)$21.00 (RRP)$21.00 (RRP)