WOLF TOOTH ELLIPTICAL EASTON CINCH DIRECT MOUNT FLAT TOP CHAINRINGS
Webshops and Bike shops
Related Products
-
Description
Wheels MFG C/ring Small spacer Kit 120pc
Assortment of chainring spacers
(20) 0.6mm
(20) 1.2mm
(5) 2mm
(5) 3.8mm
(5) 2.2mm
(5) 3mm
(5) 3.5mm
(10) 4mm
(10) 4.3mm
(10) 4.6mm
(10) 5mm
(5) 5.3mm
(5) 7.1mm
(5) 8.3mm
120 pcs. in clear plastic storage box -
Description
These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8 bolt mounting interface that is not compatible with these chainrings.
- 9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9 speed, 10 speed, and 11 speed chains. They also work with 12 speed Eagle and 12 speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12 speed Flattop chain.
- Standard: 47mm chainline, 6mm offset for cyclocross and road cranks
- Standard: 49mm chainline, 6mm offset for non-Boost mountain bikes, GXP and long spindle BB30 -
Description
Direct Mount Chainrings for Shimano Cranks for Shimano 12spd Hyperglide+ Chain BOOST / 3mm Offset
The Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology.
- The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.
- Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.
- Prevents premature ring and chain wear that can come from non-optimized profiles.
Compatibility
- Shimano XTR M9100, XT M8100, and SLX M7100 series 12 speed cranksets.
- Compatible with Shimano 12-speed Hyperglide+ chains
- Boost crankset, models M9100, M8100, M7100, MT610 - will use a Boost ring with Boost rear hub spacing (148mm)Expected Date:31 May 2024 -
Description
These rings fit any 104 BCD crankset
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle, SRAM Flattop chains)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
Quarq power meter compatible with sizes 34t and 36t. Filing required for 32t fitment onto some older Quarq Power meters. No modifications are required for the DUB Quarq Power meter.
- Chainline (approximate as BB centering and cranksets vary) - 48mm on 3x cranksets and 49mm on 2x
- Threaded to use M8 chainring bolts (no nuts required)
- Ovality of 10% and timing of 112° after TDC (top dead center)
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!) -
Description
Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 12-speed.
These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance
Compatibility
- Shimano GRX cranksets including RX600 and RX810
- Drop-Stop® ST is designed for Shimano 12-speed Hyperglide+ chains
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile provides the ultimate chain retention and mud shedding ability
