Salsa Bend Bar23 degree bend 31.8 740mm
Description
For those seeking a different take on a traditional mountain bike handlebar, the Salsa Bend Bar is available with either a 17 or 23° sweep, offering a more natural hand position without affecting reach or requiring the need to change your stem length. The Bend Bar swoops forward, then sweeps back to create an angled perch that’s easy to hang on to. They’re tough, strong and durable, and great for long days bikepacking, touring, or shredding singletrack.
Constructed using double-butted, AL-7050-T76 aluminum
Bar sweeps forward, then back, to preserve stem length
5° upsweep allows adjustment to suit personal preference
Bar can be flip-flopped to run up or down
Graduated ends for easy trimming
Bead-blast black finish
23° sweep, 740mm width
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SMHB27869Stock Code:SMHB27872Stock Code:SMHB27801
The Sparrow is a touring/townie bar. The 490mm version is more agile for squeezing through traffic than other townie/MTB bars. The 520mm is still narrow, but with a grip area that fits levers and shifters. The 560mm size is better for climbing and single-speeders. Try all the sizes on a single-speed or fixie. Can be used flipped to be used as a riser bar or down for a less upright position.
- Shotpeened Tange Aluminum
- Widths: 560 mm, 520mm or 490mm
- Silver or Black
- 25.4 mm clamp diameter
- 50mm drop/rise
- 22.2mm grip diameter, 20.0mm inside diameter at ends to allow use of pursuit levers.
- Weight 245g$170.00 (RRP)$170.00 (RRP)$170.00 (RRP) -
Stock Code:TNHB-HB-E107
Our road bar features a mild wing shape on top, clamping area wide enough for aero bars, mid-compact reach and drop. This is the modern bar for the modern road bike. Our Road bar wing section is small enough not to restrict hand movement when riding on the top and allows bar angle adjustment with out “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
1.5K woven impact ends help prevent damage to uni-directional fibers from impact.
Reach 78.5mm.
Drop is proportional. Road drops are: 40CM 137mm, 42CM 140mm, 44CM 140mm, 46CM 143mm$390.00 (RRP) -
Stock Code:TNHB-HB-E118
The Thomson aluminum trail bar is 750mm wide with 20mm of rise, 8° of backsweep and 5° of upsweep. The clamping area is 50mm allowing a different bend profile for a more compliant ride. The Trail bar gives you a light aluminum all-around bar for your Mountain Bike.
$199.00 (RRP) -
Stock Code:SMHB278006
A roomy riser bar with about 25° of backsweep for a natural wrist position. Offers comfort without sacrificing hardly any control. Dream Cycle Vancouver helped us design this model. They wanted to replicate something close to bars found on MTB bikes of the early 80's. Recommended for bikepacking and touring.
– 6061 T6 aluminum
– 780mm width
– 50mm rise
– 31.8mm center
– 25° backsweep
– 5° upsweep
– 420 grams$214.00 (RRP)Add To Cart
-
Stock Code:TNHB-HB-E136Stock Code:TNHB-HB-E135
Our new Ø35mm x 800mm wide bar comes in 2 rise options: a center rise (8mm) and 20mm rise option. All Ø35mm bars feature a 9° backsweep, and 5° upsweep.
$330.00 (RRP)$330.00 (RRP)
