Surly Terminal Bar Silver 31.8 40mm Rise
Description
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain.
Back Sweep (deg): 34 deg
Bar Clamp Diameter (mm): 31.8 mm
Weight: 400 g
Lever Compatability: Mountain 22.2
Material: Aluminum
Rise: 40 mm
Width: 735 mm
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SMHB27543Stock Code:SMHB27544Stock Code:SMHB27547Stock Code:SMHB27548Stock Code:SMHB27552Stock Code:SMHB27551Stock Code:SMHB27555Stock Code:SMHB27556Stock Code:SMHB27526Stock Code:SMHB27527Stock Code:SMHB27540Stock Code:SMHB27541Stock Code:SMHB27545Stock Code:SMHB27546Stock Code:SMHB27549Stock Code:SMHB27550Stock Code:SMHB27553Stock Code:SMHB27554Stock Code:SMHB27525Stock Code:SMHB27524Road bar with a round compact bend and shallow drop. Shape makes it easy to get into a natural position in the drops and brake levers are within easy reach.
Expected Date:06 January 2020$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP)$88.12 (RRP) -
Stock Code:TNHB-HB-E127Stock Code:TNHB-HB-E128Stock Code:TNHB-HB-E129Thomson Cyclocross 42x31.8 Carbon
Clipon compatible keep all accessory clamps inside the area marked on the bar as safe for clamping. 90mm total safe clamp area available.
For Cyclocross we present the carbon CX bar. The natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a completely round bar when wrapped. Top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
Reach 78.5mm. Drop is proportional.
Cross drops are: 40CM 131mm, 42CM 133mm, 44CM 135mm.$453.43 (RRP)$453.43 (RRP)$453.43 (RRP) -
Stock Code:TNHB-HB-E130Stock Code:TNHB-HB-E131Our aluminum drop bars bring the performance, and dependability you have come to expect from Thomson. The lineup is available in 3 profiles, and varying widths. Each made from 7000 series aluminum. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.
Our road bar wing section is small enough not to restrict hand movements when riding on the top, and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.
The Dirt drop is available in 44cm, and 46cm, a wide drop bar with 25° flare, 130mm REACH.
Ready for your next adventure, regardless of the road you choose.$237.93 (RRP)$237.93 (RRP) -
Stock Code:TNHB-HB-E115Stock Code:TNHB-HB-E132Stock Code:TNHB-HB-E133Stock Code:TNHB-HB-E134800mm wide, 20mm of rise, 9° of backsweep and 5° of upsweep. Built using 7050 Aluminum alloy for strength and long life. 65mm wide clamping area to fit our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 center section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems
Bar is butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground.
Bar is produced by advanced CNC bending to avoid the need for hand grinding. Almost all other bars are manually bent and bends are ground to appear smooth. CNC bending ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high.
Weight 295 g
The perfect addition to your Elite X4 Stem or Direct Mount Stem.$189.81 (RRP)$221.45 (RRP)$221.45 (RRP)$221.45 (RRP) -
Stock Code:TNHB-HB-E117750mm wide and offers 15mm of rise together with a 5° backsweep and 8° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for All Mountain/Freeride, light enough for racing.
Bars are made with three different fiber types with different tensile strength and tensile modulus, including High Strength carbon fibers. This helps to allocate stiffness and flex where needed.
Bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to uni directional fibers from shortening the bar or impact with the ground.
Weight 215g
*NOT SUITABLE FOR BAR ENDS.$241.39 (RRP)
