Chris King Drive Spring ISO hubs
Description
Drive Ring Spring for all rear Chris King® hubs except R45.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKWA-PHB780BStock Code:CKWA-PHB781BStock Code:CKWA-PHB782BStock Code:CKWA-PHB322Stock Code:CKWA-PHB331Stock Code:CKWA-PHB324Stock Code:CKWA-PHB313Stock Code:CKWA-PHB332Stock Code:CKWA-PHB314Stock Code:CKWA-PHB701Stock Code:CKWA-PHB587Stock Code:CKWA-PHB326Stock Code:CKWA-PHB308Stock Code:CKWA-PHB783BStock Code:CKWA-PHB304Stock Code:CKWA-PHB702BStock Code:CKWA-PHB702Stock Code:CKWA-PHB342
Select from side bar
Chris King Front 9mm Quick Release SD ISO hub Axle
To make the conversion from a 15mm SD thru hub to a standard 9mm QR ISO disc front bike hub aslo need PHB308, PHB701$76.00 (RRP)$76.00 (RRP)$76.00 (RRP)$120.97 (RRP)$120.00 (RRP)$120.97 (RRP)$120.97 (RRP)$120.97 (RRP)$61.72 (RRP)$32.91 (RRP)$125.00 (RRP)$30.00 (RRP)$32.91 (RRP)$125.00 (RRP)$120.97 (RRP)$61.72 (RRP)$61.72 (RRP)$20.90 (RRP) -
Stock Code:HLWA-HXHAA1512F
This simple product allows several* 15x100mm thru axle front hub to run with road standard 12×100 thru axle forks.
CNC machined 7075 alloy tube.
Anodised finish.
Lightweight at only 17g.
15mm OD, 12mm ID x 100 (98.5mm long)
*Please note: Some 12mm thru axle forks are only compatible with hubs which have end cones with a maximum outer diameter of 19mm. Most conventional MTB based 15mm thru axle hubs use end cones that have an outer diameter of 21mm or larger and therefore will not fit with the smaller 19mm fork slots.
Please check carefully before purchase that your fork will allow your existing outer hub cones to fit with your forks before purchasing the 15 to 12mm Adaptor Sleeve, as the sleeve does not reduce the outer diameter of the hub end cones. If in doubt please consult your local dealer.$35.00 (RRP)Add To Cart
-
Stock Code:WMWA-RTA-12-154-1.0Stock Code:WMWA-RTA-12-160-1.0Stock Code:WMWA-RTA-12-162-1.0Stock Code:WMWA-RTA-12-166-1.0Stock Code:WMWA-RTA-12-168-1.0Stock Code:WMWA-RTA-12-172-1.0Stock Code:WMWA-RTA-12-174-1.0Stock Code:WMWA-RTA-12-175-1.0Stock Code:WMWA-RTA-12-180-1.0Stock Code:WMWA-RTA-12-185-1.0Stock Code:WMWA-RTA-12-194-1.0Stock Code:WMWA-RTA-12-218-1.0Stock Code:WMWA-RTA-12-164-1.5Stock Code:WMWA-RTA-12-172-1.5Stock Code:WMWA-RTA-12-229-1.5Stock Code:WMWA-RTA-12-165-1.75Stock Code:WMWA-RTA-12-172-1.75Stock Code:WMWA-RTA-12-176-1.75Stock Code:WMWA-RTA-12-180-1.75
Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.
Product features:
- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles
Tech Specs:
- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP) -
Stock Code:PCWA-190BKORStock Code:PCWA-190BLACKStock Code:PCWA-190POLISHStock Code:PCWA-190PUBKStock Code:PCWA-190SILVERStock Code:PCWA-190SIORStock Code:PCWA-191BKORStock Code:PCWA-191BLACKStock Code:PCWA-191POLISHStock Code:PCWA-191PUBKStock Code:PCWA-191SILVERStock Code:PCWA-191SIORStock Code:PCWA-199BKORStock Code:PCWA-199BLACKStock Code:PCWA-199POLISHStock Code:PCWA-199PUBKStock Code:PCWA-199SILVERStock Code:PCWA-199SIOR
A thoroughly modern take on the traditional internal cam Quick-Release skewer.
The stainless steel shaft screws into the 7075 aluminum head, which is oval, putting the material where it’s needed and not where it isn’t. The handles are a stainless steel/aluminum affair for a good balance of ergonomics and weight savings.
The nuts have a nice matching O-ring and a thread friction element to keep them in place after the wheels are removed.
Order the skewer length that matches your hub’s width.$234.00 (RRP)$234.00 (RRP)$310.00 (RRP)$234.00 (RRP)$234.00 (RRP)$234.00 (RRP)$234.00 (RRP)$234.00 (RRP)$310.00 (RRP)$234.00 (RRP)$234.00 (RRP)$234.00 (RRP)$467.00 (RRP)$467.00 (RRP)$619.00 (RRP)$467.00 (RRP)$467.00 (RRP)$467.00 (RRP) -
Stock Code:WMWA-FTA-12-118-1.5Stock Code:WMWA-FTA-12-120-1.5Stock Code:WMWA-FTA-12-125-1.5Stock Code:WMWA-FTA-12-128-1.5Stock Code:WMWA-FTA-12-133-1.5Stock Code:WMWA-FTA-15-125-1.5Stock Code:WMWA-FTA-15-141-1.5Stock Code:WMWA-FTA-15-145-1.5Stock Code:WMWA-FTA-15-148-1.5Stock Code:WMWA-FTA-15-155-1.5Stock Code:WMWA-FTA-15-158-1.5Stock Code:WMWA-FTA-15-189-1.5Stock Code:WMWA-FTA-15-198-1.5Stock Code:WMWA-FTA1-15-135-1.5
Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.
Product features:
- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles
Tech Specs:
- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$999.00 (RRP)
