Wheels MFG 6003 Bearing Extractor

Stock Code:
WMTL-6003-EXT
Price:
Price: $46.20 (RRP)
Make an Enquiry

Description

Individual extractor for removing 6003 Bearing ID: 17mm / OD: 35mm / Width: 10mm

Find your Nearest Authorised
Webshops and Bike shops
Find a Dealer

You may also be interested in...

  • Wheels MFG Dropout Saver Kit 6 piece
    Stock Code:
    WMTL-DS-KIT
    Wheels MFG Dropout Saver Kit 6 piece

    Wheels MFG Dropout Saver Kit 6 piece
    The Dropout Saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads and install a Dropout Saver and realign the dropout.
    Kit includes (1) 15/32" drill bit, (2) DS-1 wide, and (3) DS-2 narrow dropout savers

    Stock Level:
    1
    Stock Level:
    1
    $100.80 (RRP)

    Add To Cart

  • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    • WHEELS MFG OPEN BORE ADAPTER
    Stock Code:
    WMTL-1728OB
    Stock Code:
    WMTL-2437OB
    Stock Code:
    WMTL-27537OB
    Stock Code:
    WMTL-6000OB
    Stock Code:
    WMTL-6001OB
    Stock Code:
    WMTL-6002OB
    Stock Code:
    WMTL-6003OB
    Stock Code:
    WMTL-6801OB-1
    Stock Code:
    WMTL-6802OB-1
    Stock Code:
    WMTL-6805OB
    Stock Code:
    WMTL-6806OB
    Stock Code:
    WMTL-6900OB-1
    Stock Code:
    WMTL-6903OB
    Stock Code:
    WMTL-6904OB
    Stock Code:
    WMTL-GXP-LEFT
    WHEELS MFG OPEN BORE ADAPTER

    Our 2437 open bore adapter is used to press 24x37 sealed bearings in to Shimano compatible bottom bracket cups, and direct fit frames like Trek BB90. The adapter is machined with one step at 24mm OD, which fits in to the center of the sealed bearing.


    Use with 24x37x7 bearing

    Outer Diameter: 37mm

    Inner Step Diameter: 24mm

    Inner hole sized to fit 3/8" threaded rod

    Compatible with PRESS-1 or PRESS-4 handles

    Machined, anodized gray aluminum

    Sold individually

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    1
    Stock Level:
    2
    Stock Level:
    1
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    In Stock
    Stock Level:
    2
    Stock Level:
    1
    Stock Level:
    1
    Stock Level:
    In Stock
    Stock Level:
    2
    Stock Level:
    1
    Stock Level:
    2
    Stock Level:
    In Stock
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)
    $21.00 (RRP)

    Add To Cart

  • Wolf Tooth EnCase Replacement Hex Bits
    Stock Code:
    WTTLENCASE-HEX-BITS
    Wolf Tooth EnCase Replacement Hex Bits

    Replacement parts for the Wolf Tooth EnCase® System

    Stock Level:
    In Stock
    Stock Level:
    In Stock
    $39.43 (RRP)

    Add To Cart

  • Wolf Tooth Axle Handle Multi-Tool Orange
    Stock Code:
    WTTL-AXLE-TOOL-ORG
    Wolf Tooth Axle Handle Multi-Tool Orange

    The Wolf Tooth Axle Handle Multi-Tool is a minimalist, lightweight option to cover 10 essential tool functions. It is stored at the end of a Wolf Tooth rear axle during rides as a multi-tool that is easy to access for quick adjustments and trailside fixes.

    An O-ring on the inside of the axle’s threaded end locks the Axle Handle Multi-Tool in place so it is secure while riding. On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for double-sided hex bits that nest on the inside of the handle via magnet. It was designed for Wolf Tooth axles, though is compatible on other axles that have a threaded end.

    Four hex bits are included with the Axle Handle Multi-Tool. Two bits can then be selected to be stored in the back of the tool based on the functions that you use the most. Each bit has two functions. So if you find yourself frequently reaching for the 4mm hex on a multi-tool in your frame bag, the Axle Handle Multi-Tool makes it quickly available and always within reach, without needing to unpack your tool wrap on the trail.

    - Four hex bit options are included, allowing the cyclist to select functions most frequently used: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible

    - Designed for Wolf Tooth rear axles with a female threaded head-end but also compatible with axles from Trek and other manufacturers that have a removable handle retained with an o-ring"

    - Available in eight colors to match other Wolf Tooth anodized components and accessories

    - Designed, engineered, and machined at Wolf Tooth in Minnesota with 6061-T6 aircraft-grade aluminum

    Compatibility

    - Designed for Wolf Tooth rear axles with a female threaded head-end but also compatible with axles from Trek and other manufacturers that have a removable handle retained with an o-ring"

    Stock Level:
    1
    Stock Level:
    1
    $73.50 (RRP)

    Add To Cart

  • Wheels MFG Bike Extractor Essential Kit
    Stock Code:
    WMTL-EX0002
    Wheels MFG Bike Extractor Essential Kit

    These extractors remove sealed bearings with inside diameters from 15,17,20 and 25mm.

    Bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.

    All extractors are size-specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.

    Removes these sealed bearing sizes: 6002, 6003, 6804, 6805Precision Machined

    4-piece set includes:

    (1) 15mm ID Bearing Extractor
    (1) 17mm ID Bearing Extractor
    (1) 20mm ID Bearing Extractor
    (1) 25mm ID Bearing Extractor
    (1) Spare parts bag
    (1) bolt set

    Stock Level:
    2
    Stock Level:
    2
    $199.50 (RRP)

    Add To Cart