- Home /
- Components /
- Bottom Bracket /
- Wheels Mfg 386EVO Threaded CER BB Black
Wheels Mfg 386EVO Threaded CER BB Black
Description
Threaded BB for 386EVO frames. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance.
No more creaking. Smooth operation. Fast bearing replacement.
Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).
Bearings: Enduro ZERØ Ceramic Hybrid
Bottom Bracket/Frame Interface: BB386EVO
Bottom Bracket Shell Width (mm): 86.5mm
Bottom Bracket Shell I.D.: 46mm
Crank Spindle Diameter: 30mm
Weight: 126g
*Will accept 24mm and 24/22mm cranksets using Wheels Mfg. 386EVO BB / Crank Adapters
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-BB30-OUT-7
Wheels Manufacturing’s new BB30 to Outboard bottom bracket is designed for installing 24/22mm (SRAM, Truvativ, Etc.) cranks into BB30 frames without the need for any adapters.
Weight: 153g
Made in the USA
Choose from Black or Red anodized machined aluminum cups
Enduro ABEC 3 sealed bearings
Dual silicone seal keeps the contamination out for longer life
Will accept current 24/22mm (SRAM, Truvativ, Etc.) cranks
Bottom Bracket Shell Width (mm): 68mm - 73mm
Bottom Bracket Shell I.D.: 42mmStock Level:In StockStock Level:In Stock$199.50 (RRP)Add To Cart
-
Stock Code:WMBB-BB86-GXPSEAL
22mm x 41mm GXP outer seal for Wheels Mfg bottom brackets. This seal is for the non-drive side cup when using 24/22mm spindle cranksets (SRAM, Truvativ, etc).
Note: Install seal with lettering facing towards the bearing.
Fits the following bottom brackets:
- BB30 / PF30 Outboard
- BB86/92Stock Level:Out Of StockStock Level:Out of Stock$5.68 (RRP) -
Stock Code:WMBB-BB30-30-10MM
Used to adjust crank chainline or take up any slack when using 30mm spindle cranks.
Inner Diameter: 30mm
Outer Diameter: 41.5mm
Thickness: 10mm
Sold IndividuallyStock Level:In StockStock Level:In Stock$18.90 (RRP)Add To Cart
-
Chris King CERAMIC Road Bottom Bracket Shim/Xtype/FSA (use mtb BB for FSA road Lite cranks ) 24mm spindle
The construction and compatibility of this Chris King® Ceramic Bearing Bottom Bracket are identical to the Chris King® stainless steel bearing bottom bracket. However, this bottom bracket uses ceramic balls, which are lighter, harder and have greater roundness than stainless steel balls, resulting in a bearing with less friction and exceptional speed and strength.
These factors along with Chris King's sealing system mean you need only use a very small amount of low-viscosity lube in the bearing. This means less drag in the bearing, allowing you to pedal with greater efficiency.
•Designed for Shimano™-compatible external type crank systems including Shimano™ Hollowtech II™, Race Face X-Type™, and FSA MegaExo™
•24 ball bearings per side
• Fully user-serviceable bearingsStock Level:1Stock Level:1$357.12 (RRP) -
Stock Code:CKBB-ABB1Stock Code:CKBB-ABR1Stock Code:CKBB-ABS1Stock Code:CKBB-ABY1Stock Code:CKBB-ABM2Stock Code:CKBB-ABZ1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ 30 fits 30mm spindle cranks in 68mm BB shells and SRAM DUB cranks.
Our ThreadFit™ 30 bottom bracket is silky smooth and long-lasting thanks to our legendary, angular-contact bearings, both steel and ceramic, the best in the industry. They actually get faster over time as their contact surfaces wear, because we build them to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag and butter smooth feel come from.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
Our Threadfit™ 30 bottom brackets come in an array of beautifully anodized colors and each one includes a Fit Kit that allows it to be used with a wide selection of road and mountain bike cranks.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use
- Uses Chris King bottom bracket cup tool for installationStock Level:In StockStock Level:Out of StockStock Level:Out of StockStock Level:In StockStock Level:1Stock Level:Out of StockStock Level:Out of StockExpected Date:06 June 2024$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)$330.00 (RRP)