Wheels MFG T47 A/C OUT BB 30mm Black
Description
T47 threaded BB cups for T47 frames and 30mm diameter spindle cranks. Cups have outboard bearings, and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKBB-PBB023Stock Code:CKBB-PBB024
Fits:
• Press Fit 30 BB Shells
• 73mm Wide BB Shells
• 24mm>22mm Mountain Cranksets
• Common Cranks*: SRAM mtn, Zinn mtn, Bontrager mtn, TruVativ mtn$48.28 (RRP)$54.08 (RRP) -
Stock Code:WMBB-BBUNIV-SHIM
The BBMULTI-SHIM kit adapts Shimano or similar 24mm cranks to virtually any BB30/PF30/BB30a frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm.
This kit includes 2 adapter shims and a 14-piece assortment of left and right side spacers.
Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank.
Machined engineering-grade Delrin.$118.00 (RRP) -
Stock Code:WMBB-BB-MTB-1Stock Code:WMBB-BB-MTB-1-6Stock Code:WMBB-BB-MTB-1-3Stock Code:WMBB-BB-MTB-1-7Stock Code:WMBB-BB-MTB-1-1Stock Code:WMBB-BB-MTB-1-5
Wheels Manufacturing standard outboard bottom bracket features Enduro ABEC 3 sealed bearings. Compatible with 24mm (Shimano, FSA, Etc.) cranks. Fully serviceable.
Weight: 98g
Road (68mm Shell width) - Grey anodized, machined aluminum cups
Mountain (73mm Shell width) - Black or Red anodized, machined aluminum cups
Enduro ABEC 3 sealed bearings
Dual silicone seal keeps the contamination out for longer life
Will accept current 24mm spindle (Shimano, FSA, Etc.) cranks$184.00 (RRP)$184.00 (RRP)$184.00 (RRP)$184.00 (RRP)$184.00 (RRP)$184.00 (RRP) -
Stock Code:BBBB-46-79-25-B5
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.$169.95 (RRP)Add To Cart
-
Stock Code:CKBB-ACB2Stock Code:CKBB-ACM2Stock Code:CKBB-ACS1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 24i fits 86mm and 92mm shell widths with 24mm spindles.
All our bottom brackets come with King’s legendary, angular-contact bearings. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
The Fit Kit for our ThreadFit™ T47 24i is available here.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- Engineered, manufactured and assembled in Portland, Oregon USA
- A Fit Kit is required for use
- Uses Chris King bottom bracket cup tool for installationExpected Date:27 June 2025$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)
