- Home /
- DERAILLEUR HANGERS /
- Derailleur Hangers /
- DH113 MARIN
DH113 MARIN
Description
Attaches to frame with (2) M4x8 flat head screws
Fasteners not included
Replaces Marin hanger #11
Marin
Alpine Trail - Full Suspension - 2004
Attack Trail (all) - 2004-2006
East Peak - 2003-2007
Mount Vision (all) - 2003-2007
Mount Vision Pro - 2003-2007
Rift Zone - 2003-2007
Rock Springs - 2004-2006
Wolf Ridge (all) - 2004-2007
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMDH-023
Attaches to frame with (1) M8 Chainring Bolt
Fastener included
Replaces:
GT Hanger Part# ATIDH0031
Jamis Part #12-0047
Schwinn Part #ATIDH0031
Note: GT ran a small run of ZR 1.0 frames between 2000 and 2001 for the Lotto professinal road team that used a different hanger. THis hanger does not fit those bikes.
GT
Four - 2009
GTR - 2005-2006
GTR 1.0, 1.2, 1.3, 1.4 - 2006
GTR Alloy - 2007
GTR GTw Series Four - 2008
GTR GTw Series Three - 2008
GTR GTw Series Two - 2008
GTR Series - 2009
GTR Series 3, 4 - 2010
GTR Series 3, 4 - 2009-2010
GTR Series 3, 4, 5 - 2011
GTR Series Five - 2007
GTR Series Four - 2007-2008
GTR Series Three - 2007-2008
GTR Series Two - 2007
GTR Type CX - 2008-2012
Legato - 2007
Legato - 2009
Legato 2.0 - 2008
Legato 2.0,3.0,4.0 - 2008
Legato GTw 2.0, 3.0, 4.0 - 2008
Lotto - 2000
Road Bike - 2000-2001
Series 1, 2 - 2006
Three - 2009
Type CX - 2009-2010
Type CXI - 2010
ZR - 1999-2000
ZR 1.0,2.0,3.0,4.0,5.0 - 2001
ZR Road 1000-5000 ZRX - 2000
ZRX and Other ZRS - 2001
Jamis
Aragon - 2000-2005
CC 1.0 - 2003
CC 2.0 - 2003
Citizen 2.0 - 2009
Citizen 2.0 Lady - 2009
Citizen 3.0/2.0 - 2011
Citizen 3.0/2.0 Femme - 2011
Citizen 3.0/2.0/1.0 - 2010
Citizen 3.0/2.0/1.0 Femme - 2010
Commuter 2.0 - 2009
Commuter 2.0 Lady - 2009
Crosscountry - 2000-2001
Crosscountry SC - 2002
Crosscountry SX - 2001-2002
Durango - 2000
Durango Sport SX - 2001
Explorer 2.0 - 2005
Explorer 2.0 - 2003-2004
Explorer 3.0 - 2003-2005
Explorer 4.0 - 2003-2005
Tangier - 2001-2005
Schwinn
CX - 2007-2009
Fastback Series - 2002-2009
Le Tour - 2011
Le Tour Series - 2007-2010
Super Sport Series - 2003-2009
Team In Training - 2009Stock Level:Out Of StockStock Level:Out of Stock$52.00 (RRP) -
Stock Code:WMDH-304
Attaches to frame with (1) M8 Chainring Bolt (Long - Bolt Only)
Fastener Included
For QR Axle
Replaces Pivot Part #016 (FP-RDH-QR-9MM-BLK-V1)
Pivot
Firebird - 2011-older
Mach 4 - 2011+
Mach 4 - 2011-older
Mach 429 - 2011-older
Mach 5 - 2011-older
Mach 5.7 - 2011-olderStock Level:In StockStock Level:In Stock$62.00 (RRP)Add To Cart
-
Stock Code:PSDH-CH0910
- Allows for the use of a derailleur on frames without derailleur hangers
- For use with rear-facing horizontal dropouts and 10mm axleStock Level:In StockStock Level:In Stock$68.26 (RRP)POA -
Stock Code:WTDRROADLINK-DM
The RoadLink DM (Direct Mount) is the RoadLink that fits Shimano’s R7000 105, R8000 and RX800 Ultegra and R9100 Dura-Ace rear derailleurs. Since its introduction, the award-winning Wolf Tooth RoadLink has given riders the ability to easily increase the range of their Shimano road drivetrains while maintaining near-factory levels of chain wrap and shifting performance.
Like the mountain-focused GoatLink, the RoadLink DM replaces Shimano’s stock direct mount link allowing you to relocate the derailleur to provide clearance for larger-than-stock range cassettes while maintaining chain wrap and improving shifting. The result—larger gear ranges that riders want and expect for their road, commuter, gravel, and touring bicycles.
Compatibility
- Fits Shimano R9100-generation Dura-Ace, R8000-generation Ultegra, RX800 and RX805 Ultegra, and R7000 105 rear derailleurs
- Fits standard derailleur hangers only
- Direct mount derailleur hangers are not supported. These are not common and the stock b-link that the RoadLink DM replaces will not be present on bikes with a direct mount derailleur hanger
- Optimized for use with 11-36t, 11-40t, and 11-42t 11-speed cassettes
- Will improve performance with 10-42t 11-speed cassettes, but not to factory levels
- Does not change the derailleurs total chain wrap capacity.Stock Level:In StockStock Level:In Stock$62.92 (RRP)Add To Cart
-
Stock Code:WMDH-562
All Wheels Manufacturing replacement derailleur hangers are produced in Colorado shop to exacting tolerances.
- CNC machined 6061 aluminum
- Thru Axle Thread Pitch M12x1.0
- Use without the B-Link when attaching
- Retains ability of original SRAM UDH to rotate under impact to help protect the derailleur in the event of an impact.
Adds direct mount compatibility with Shimano Road and Gravel derailleurs to any SRAM UDH compatible frame. Optimized for Shimano-Dura-Ace (R9100 and R9150), Ultegra-(R8000, R8050, RX800, and RX805), 105 (R7000), and GRX-(RX810, RX812, RX815, RX817, and RX400)Stock Level:1Stock Level:1$111.00 (RRP)Add To Cart