Wheels MFG C/ring Small spacer Kit 120pc
Description
Wheels MFG C/ring Small spacer Kit 120pc
Assortment of chainring spacers
(20) 0.6mm
(20) 1.2mm
(5) 2mm
(5) 3.8mm
(5) 2.2mm
(5) 3mm
(5) 3.5mm
(10) 4mm
(10) 4.3mm
(10) 4.6mm
(10) 5mm
(5) 5.3mm
(5) 7.1mm
(5) 8.3mm
120 pcs. in clear plastic storage box
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WTCHOVAL-SDM38-FTStock Code:WTCHOVAL-SDM40-FTStock Code:WTCHOVAL-SDM42-FT
Elliptical Direct Mount Chainrings for SRAM Cranks STANDARD / 6mm Offset FLATTOP
10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10 speed, and 11 speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain.
- These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. Note that the SRAM 12spd Red and Force AXS use a different 8 bolt mounting interface that is not compatible with these chainrings.
- Also compatible with Cane Creek eeWing cranksets.
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors’ versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
It’s like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” – between 1-5 and 7-11 on a clock face – to take advantage of your body’s natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.
Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.$170.00 (RRP)$180.00 (RRP)$180.00 (RRP) -
Stock Code:WTCH-SHDM-R-S-03P-28Stock Code:WTCHSHDM30-BST-SH12Stock Code:WTCHSHDM32-BST-SH12Stock Code:WTCHSHDM34-BST-SH12
Direct Mount Chainrings for Shimano Cranks for Shimano 12spd Hyperglide+ Chain BOOST / 3mm Offset
The Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology.
- The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.
- Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.
- Prevents premature ring and chain wear that can come from non-optimized profiles.
Compatibility
- Shimano XTR M9100, XT M8100, and SLX M7100 series 12 speed cranksets.
- Compatible with Shimano 12-speed Hyperglide+ chains
- Boost crankset, models M9100, M8100, M7100, MT610 - will use a Boost ring with Boost rear hub spacing (148mm)$170.00 (RRP)$170.00 (RRP)$170.00 (RRP)$170.00 (RRP) -
Stock Code:WTCH-SHEP8-32-BStock Code:WTCH-SHEP8-32-STStock Code:WTCH-SHEP8-34-BStock Code:WTCH-SHEP8-34-ST
Wolf Tooth Direct Mount Chainrings for Shimano E-Bike Motors have a 55mm chainline and are compatible with all Boost and Super Boost bikes that use the Shimano EP8, E8000, and E7000 e-bike motor splines.
- The Drop-Stop B tooth profile is compatible with almost all 9-, 10-, 11-, and 12-speed chains – the only exception is Shimano Hyperglide+.
- The Drop-Stop ST tooth profile is only compatible with Shimano Hyperglide+ chains.
- Direct Mount Chainrings for Shimano E-Bike Motors are machined with 7075-T6 aluminum at Wolf Tooth in Minnesota, USA.$163.77 (RRP)$163.77 (RRP)$163.77 (RRP)$163.77 (RRP) -
Stock Code:WTCHRFC30-BST-BStock Code:WTCH-RFC-R-B-00F-32Stock Code:WTCHRFC32-BST-BStock Code:WTCHRFC32Stock Code:WTCH-RFC-R-B-00F-34Stock Code:WTCHRFC34-BST-BStock Code:WTCH-RFC36-BST-BStock Code:WTCH-RFC-R-B-00F-36
Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring.
Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm (Boost) offset chainring.
Drop-Stop B Compatibility:
- Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect)
- Boost (148mm hub spacing)
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle, SRAM 12 spd Transmission (T-type) and Road Flattop chains)
- Chainline 52mm (Boost)Expected Date:03 September 2025$160.00 (RRP)$148.32 (RRP)$148.32 (RRP)$148.32 (RRP)$148.32 (RRP)$160.00 (RRP)$170.00 (RRP)$154.50 (RRP) -
Stock Code:WTCH4CB10BLKStock Code:WTCH4CBCN06BLKStock Code:WTCH4CBCN06BLUStock Code:WTCH4CBCN06GLDStock Code:WTCH4CBCN06GRYStock Code:WTCH4CBCN06ORGStock Code:WTCH4CBCN06PRPStock Code:WTCH4CBCN06REDStock Code:WTCH5CBCN06BLKStock Code:WTCH5CBCN06BLUStock Code:WTCH5CBCN06GLDStock Code:WTCH5CBCN06GRYStock Code:WTCH5CBCN06ORGStock Code:WTCH5CBCN06PRPStock Code:WTCH5CBCN06REDStock Code:WTChBOLT-M5X8Stock Code:WTCH4CBCN06ESPStock Code:WTCH5CBCN06ESPStock Code:WTCH5CBCN06RSILStock Code:WTCH4CBCN06RSIL
We designed these bolts to be the best on the market. They have a 4 mm hex socket and are 10 mm long so you can use a bash ring with your chainring that has threaded standoffs like our 104 BCD 30t ring, elliptical 104 BCD rings, 76 BCD rings and others. No nuts are included with these bolts as they are intended for use with threaded chainrings.
Compatibility
- Any of our bolt-on Drop-Stop® chainrings with threaded standoffs:
104 BCD x 30T in aluminum or stainless steel
10mm long bolts required for use with the 104 BCD bash ring and this ring.
- 104 BCD elliptical
10mm long bolts required for use with the 104 BCD bash ring and this ring.
- 96 BCD symmetrical (not XTR)
10mm long bolts required for use with the 96 BCD bash ring and this ring.
- 76 BCD when used with Specialized Stout crankset
- Any other brands chainrings that have M8 x .75 threaded standoffsExpected Date:03 September 2025Expected Date:03 September 2025Expected Date:03 September 2025$50.00 (RRP)$60.00 (RRP)$60.00 (RRP)$60.00 (RRP)$60.00 (RRP)$60.00 (RRP)$60.00 (RRP)$60.00 (RRP)$70.00 (RRP)$70.00 (RRP)$70.00 (RRP)$70.00 (RRP)$70.00 (RRP)$70.00 (RRP)$70.00 (RRP)$20.00 (RRP)$60.00 (RRP)$70.00 (RRP)$70.00 (RRP)$60.00 (RRP)
