Wheels MFG BB30 Kit, Bearings & Clips
Description
Service Kit includes SB-6806 sealed bearings and 2 retaining clips.
Fits standard BB30 frames
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-BB-ROAD-17
Wheels Manufacturing’s standard outboard bottom bracket features Enduro ABEC 5 angular contact bearings. Compatible with 24/22mm (SRAM, Truvativ) cranks.
In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear.
Weight: 98g
Road (68mm Shell width) - Grey anodized, machined aluminum cups
Mountain (73mm Shell width) - Black or Red anodized, machined aluminum cups
Enduro ABEC 5 Angular Contact sealed bearings
Dual silicone seal keeps the contamination out for longer life
Will accept current 24/22mm spindle (SRAM, Truvativ) cranks$210.00 (RRP)Add To Cart
-
Stock Code:WMBB-BBRIGHT-SRAM
Wheels MFG BBright reducer to Sram 24-22mm step axle cranks
For adapting SRAM cranks to BBRight-standard frames
Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, and R5 VWD (not compatible with R5ca direct-fit bb)
Note: This adapter is not compatible with the FSA BBRight bottom bracket
Includes eight 0.7mm shims for fine-tuning chain line
Machined engineering-grade Delrin. 48g/pr$88.20 (RRP)Add To Cart
-
Stock Code:WMBB-ORING42X44X2Z
Replacement o-rings for Wheels Mfg PressFit 30 (PF30) and PF30-OUT & BB30-OUT bottom brackets. This is the larger o-ring that sits on the larger section of each cup nearest the outer flange.
42mm x 44mm x 2mm
2 o-rings per bag$3.40 (RRP)Add To Cart
-
Stock Code:WMBB-BBSEAL-SRAMStock Code:WMBB-24MMSEAL
24mm Outer Silicone Seal for Bottom Brackets
Outer seal for Wheels Mfg BB86/92, PF30-OUT, BB30-OUT, BB-ROAD, BB-MTN bottom brackets.
Note: Install seals with rubber-side facing away from bearing.
24mm ID for Drive-Side cup (Both Shimano and SRAM)
24mm ID for Non-Drive Side cup with 24mm crank spindle (Shimano, FSA, etc)
* Sold Individually$5.68 (RRP)$8.65 (RRP) -
Stock Code:WMBB-T47-OUT-29MM
T47 threaded BB cups for T47 frames and 29mm spindle diameter SRAM DUB compatible cranks. Cups have outboard bearings, and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
1 - 2.5mm crank spindle spacer
Bearings: Enduro ABEC-3
Bottom Bracket Shell Width (mm): 68mm - 100mm
Bottom Bracket Shell I.D.: 47x1.0mm Threaded
Crank Spindle Diameter: 29mm
Tool Pattern: 48.5mm x 16-notch$273.00 (RRP)
