Pedros Splined Bottom Bracket Socket 20T
Description
Socket Tool For Shimano® and ISIS Drive® Splined 20-Tooth BB Cups
- Fits all Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups and other cartridge bottom brackets.
- Updated design features a square 3/8" drive. Also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise.
- Professional quality, precision sized for the perfect fit.
Pedro's socket tools provide the professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components.
Pedro's designed each socket tool to fit perfectly protecting the component and ensuring simple and safe usage for the mechanic. The updated Splined Bottom Bracket Socket features a square 3/8" drive. The socket also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise.
For tough bottom bracket jobs, make sure to check out the BB Socket Holder designed to help hold the Splined Bottom Bracket Socket in place. The 20-tooth pattern fits a variety of cartridge style bottom brackets that feature square taper, Octalink®, ISIS Drive™, and other similar spindles including models from FSA®, Shimano®, Truvativ®, Race Face®, and others.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:BBTL-MTB32TOStock Code:BBTL-MTB34TOStock Code:BBTL-MTB35/36TOStock Code:BBTL-MTB38TOStock Code:BBTL-MTB40TO$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)
-
Stock Code:ABTLABTPRESSHV2
This press is the backbone of any modern shop. Bearing related work is becoming more and more common on modern bikes and no shop, professional or amateur should pass over these tools. The Modular bearing press starts with the press head. Where most manufactures just have a glorified nut we went further by adding a massive thrust bearing. Not a wimpy little plastic washer either, an actual bearing with balls and races. What this means is that the pressing action is almost completely isolated from the torque, creating a super smooth pressing action that requires noticeably less effort. Then we added a pair of 5" machined handles for a little extra leverage. We use a 1/2" acme thread for our press shaft, which means a more robust thread and less turning due to it's coarser thread. It also means we have a single diameter to work with and can size our drifts to this dimension, this means your bearings are more likely to go in straight. At the other end of the press is our new Quick Nut. This simple part allows you to slide the nut over the press shaft to the desired location and then click it into place and press away. No endless turning, no pinch hazard and no wasted time. Be aware, the quick nut does require a few uses to fully break in.
Kit includes a complete handled press head, 12" press shaft, quick nut and the following drifts;
PF30/1.125" headset
24mm bottom bracket drifts, for shimano compatible bottom brackets
22mm bottom bracket drift, single drift for non drive GXP bottom bracket
28.9mm bottom bracket drift, for SRAM DUB
6806 drift for BB30 bottom brackets
1.5" headset drift
centering cone
Additional drifts are on the bearing page and longer press shafts along with service parts are available on the parts page.
We always recommend installing bearings one at a time to ensure they go in straight and don't damage the bearings, components or the tools. Use the centering cone in the empty side of the hub/frame/linkage to keep the press concentric with the bore.
Made in Bend Oregon.$635.00 (RRP)Add To Cart
-
Stock Code:RLTL-LTPK20M
This Is Kit Includes:
1. LTP20 - Loobtoob Pro 20ml Syringe
1. BS814- Medium Brush-it Applicator
1. Radar Laboratories Sticker
1. RADLABS Holographic Sticker
1. Set of Replacement Syringe Seals
LTP20 - Loobtoob Pro 20ml Syringe
Crushproof fully featured Pro syringe with a 20ml capacity.
Can contain and dispense almost any semi-solid material.
Luer-Lock fitting accepts any attachment.
Luer-Lock Compatible
Crushproof Premium Construction
Stainless Connection Fitting with O-Ring
Replaceable O-Ring Sealing Plunger
Ergonomic Dispensing Handle
1ml Graduation Marks
Brass Plunger Rod with Dosing / Locking Nut
Includes Loobtoob Label (not applied)
Includes Replacement O-Rings
Guaranteed for life!
BS814- Medium Brush-it Applicator
Nylon brush applicator with a medium 8x3mm tip, for general projects.
Material dispenses into the brush for clean, convenient one handed application.
For use on fasteners, medium sized areas, clamping surfaces.
Luer-Lock Compatible
Seamless Stainless Steel
Durable Nylon Bristles
Crushproof Polypropylene Connector
14 gauge Opening for Precise Control
Guaranteed for life!$26.00 (RRP) -
Stock Code:ABTL-DUBDSTCPTI
This dedicated socket is built to engage all 4 of the holes on a SRAM dub crank arm dust cap. These caps don't normally need to be removed but when you do need to work with them, few things work well. These tools feature a common 3/8" square drive like the rest of our socket range and also have a hexagonal exterior so you can mount them in a vise and use the crank arm as the lever if so desired. The sockets are also marked for the left hand thread (clockwise to loosen) this part uses.
Compatible with all SRAM dub cranks, road/mountain/gravel.
Made in Bend Oregon.$63.00 (RRP)Add To Cart
-
Stock Code:ABTL-STD-LVRSTTR
The lever setter is a unique tool that works in conjunction with our HAG to set brake and shifter levers at the same height from side to side. The tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter. Then you can use the HAG indicator to set levers the same from one side of the bar to the other. It's a great little fitting tool to eliminate variables in your bike fit. It's also great to balance the variations in bends that metal bars sometimes have from one side to the other. Once you're satisfied with your lever placement simply remove the tool and replace your headset top cap and go ride.
Recommendations:
It's advised to use a spacer on top of the stem to help align the lever setter with the steer tube. This will reduce the impact the quality of the cut on the steer tube has on the function of the tool. The supplied threaded stud can be replaced with a longer one if needed.
H.A.G. sold separately.
Made in Bend Oregon$74.00 (RRP)Add To Cart
