Pedros Pro Bit Drve JIS PH1/2/Blade
Description
Pro Bit Driver - JIS PH #1, JIS PH #2, 5mm Flat Blade
- Ergonomic machined aluminum body with bearing-mounted rotating cap for precision and control.
- Magnetic bit drive accepts any standard ¼” hex bit.
- Internal storage for two bits. Also compatible with Multi-Torque Bit Set.
- Includes JIS compatible PH#1, JIS compatible PH#2, and 5mm Flat Blade bits.
Designed for speed, precision, control, and versatility the Pro Bit Driver is ideally suited to assembly and tuning, and easily adapts to different tasks.
Features precision S2 tool steel bits, machined aluminum body, ¼” magnetic hex bit drive, and bearing-mounted rotating end cap. Add the compatible Multi-Torque Bit Set to store eight additional bits on board.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:BBTL-MTB32TOStock Code:BBTL-MTB34TOStock Code:BBTL-MTB35/36TOStock Code:BBTL-MTB38TOStock Code:BBTL-MTB40TO$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:PDTL6400520
Durable double-ended brush - Ideal for chains, cogs, derailleurs, and chainrings.
Recommended for use with Pedro's cleaner and degreaser products.
Solvent resistant synthetic handle and bristles.
Not recommended for oral use.
Pedro's Toothbrush is designed to tackle the drivetrain and is ideal for cleaning chains, cogs, derailleurs, and chainrings. The ergonomic handle is paired with two purpose built brush features. The tapering length bristles up front are designed to scrub the intricate surfaces of chains, chainrings and cassettes while at the opposite end, longer, stiffer, larger-diameter bristles reach deep between the cassette cogs removing even the deepest dirt and grime.
The Pedro's Toothbrush can also be a great tool for applying degreaser to drivetrain parts. While holding the Toothbrush flat with the bristles out to the side, pour degreaser to the bristles. Then quickly move the toothbrush to the drivetrain and apply the degreaser using a light scrubbing motion. This technique works especially well with Pedro's Degreaser 13.$12.00 (RRP)Add To Cart
-
Stock Code:PDTL6450657
DOES NOT INCLUDE TOOLS
Personalization focused platform provides a versatile foundation to build a customized tool case setup ready to get the job done.
Heavy-duty 56 x 35 x 23cm wheeled case is lockable, dustproof (IP6X), waterproof (IP7X), and MIL-spec certified. Features heavy-duty latch closures, 3 ergonomic handles (2 carry, 1 retracting), and automatic pressure release valve, all backed by a lifetime warranty.
Contents include a lid-mounted upper panel with a tappable 325-hole array, a multi-position lower case divider panel with 24 additional tappable holes, 50 tool clips in five sizes, two heavy duty parts trays with hinged lids, and a Burrito Tool Roll II.
The original professional event travel case, Pedro's Master Tool Case has been trusted by mechanics around the world since 2004 and has a track record matched by no other. Building upon this solid foundation, the new 4.0 edition features updates from top to bottom. The new case is inspired by the latest trends from the pits, rethinking what a travel tool case can be, with thoughtful consideration to allow the flexibility mechanics want and need to customize their personal setups. The new heavy-duty case adds 100+ cubic inches (1640cc) of internal space while the wheeled design with retracting handle and two carry handles adds ease and convenience. The lid-mounted upper panel offers a blank slate ready for your custom tool layout. Use the included tool clips to dial in your setup or add your own personalized touches. The lower case divider panel offers multiple options with two primary positions and three sub-positions for fine tuning fit. It also features an array of holes. Add clips or customizations to secure items to the divider panel in the lower case. The custom parts trays, with removable hinged lids, offer secure storage for small parts and are designed to nest internally on the upper edge of the lower case. When it's time to get to work, the trays mount externally on the case and feature tool slots perfect for staging in-use tools. Finally, the workhorse Burrito Tool Roll II's unique x-frame system quickly converts it from a flexible roll into a rigid tool pallet designed to hang on the front of the 4.0 case. The Burrito Tool Roll II features a large 23x16in (60x40cm) surface with numerous pockets in assorted sizes and types including a large mesh zipper pocket to securely hold small parts or tools. Pack it full, store inside your case rolled up, then unroll, hang on your case, and get to work. Case weight is 20.6lb (9.3kg). Industry mechanics, apply for VIP account at pedros.com/vip for wholesale friendly pricing.
Includes:
Heavy Duty Wheeled Case
Burrito Tool Roll II
2 Parts Trays with Lids
Lower Case Divider Panel
Upper Case Tool Panel
6mm Tool Clips (Qty 10)
10mm Tool Clips (Qty 10)
13mm Tool Clips (Qty 5)
16mm Tool Clips (Qty 10)
19mm Tool Clips (Qty 5)
M2.5x0.45 Clip Mounting Screws (Qty 50)
M2.5x0.45 Tap with Handle
Panel/case mount screws (8 Installed, 20 extra)$1,000.00 (RRP)Add To Cart
-
Stock Code:ABTL-STD-SOCKET-13MM
This is a 13mm socket made specifically for the bleeders on modern Fox forks. These bleeders are built just like a top cap, with minimal height of the hex drive. So it's a perfect application for our original chamferless sockets. Use these to install the fenders that mount behind the bleeders or when servicing your fork. Socket uses a 3/8" square drive
Compatibility:
Fox fork models 36,38 and 40 equipped with bleeders.
Made in Bend Oregon$52.00 (RRP)Add To Cart
