Pedros Demi Torque Wrench II & Bit Set
Description
1/4" Ratcheting Reversible Click-Type Micrometer Torque Wrench (3-15Nm) with Bit Set and Custom Tool Roll.
- Integrated bit holder for storage of 8 bits on the wrench.
- Square 1/4" reversible ratcheting drive designed for left-hand or right-hand thread 3-15Nm torque settings.
- Small overall size and low profile head perfect for tight spaces and easy handling.
- Includes custom tool roll for wrench and bit storage.
Included bits and adapters:
Hex: 2.5, 3, 4, 5, 6, (25mm), 4 & 5mm (50mm)
Torx: T10, T15, T20, T25, & T30 (25mm), T25 (50mm)
Crowfoot: 7 & 8mm Flare Wrench
Drive Adapter: 1/4" square to 1/4" hex
Pedro's Demi Torque Wrench II is designed for left-hand or right-hand thread 3-15Nm torque settings required for critical components such as handlebars, stems, and controls.
The new design features an integrated bit holder for storage of 8 bits on the wrench for convenience and versatility and the small overall size and low profile head are perfect for tight spaces and easy handling.
The Demi Torque Wrench II is quickly set using a micrometer-style dial and simple locking mechanism. Accurate to within +/- 4 percent.
Backed by Pedro's two year warranty.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-E-BIKESOCKET05Stock Code:WMTL-E-BIKESOCKET03Stock Code:WMTL-E-BIKESOCKET02Stock Code:WMTL-E-BIKESOCKET06Stock Code:WMTL-E-BIKESOCKET01Stock Code:WMTL-E-BIKESOCKET04Stock Code:WMTL-E-BIKESOCKET10Stock Code:WMTL-E-BIKESOCKET09Stock Code:WMTL-E-BIKESOCKET07Stock Code:WMTL-E-BIKESOCKET11Stock Code:WMTL-E-BIKESOCKET08
Compatible with 60mm Gen 1 Bosch Lockring.
Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red.$72.00 (RRP)$81.00 (RRP)$81.00 (RRP)$81.00 (RRP)$96.00 (RRP)$100.00 (RRP)$81.00 (RRP)$52.00 (RRP)$72.00 (RRP)$81.00 (RRP)$72.00 (RRP) -
Stock Code:WMTL-BENCHTOPMAT1-1
You probably know that it's important to keep your workbench clean and organized, but it can be tough to do this when you're working on bikes. Parts and tools tend to scatter everywhere, and before you know it your bench is covered in grease, grime and you are missing half the parts.
Wheels Manufacturing has the perfect solution - the Ultimate Bike Benchtop Mat. This mat is designed specifically for keeping your workbench clean and organized while you work on your bike. The mat has an extra large work area, compartments for parts, tools, and components, so everything is within reach and easy to find. Plus, the mat has useful tools built in like metric and imperial rulers, ball bearing and sealed bearing gauges which make it easier to identify the parts you need when working on your bike. Don't go another day without this essential tool in your cycling arsenal.
- Built in gauge to easily and accurately identify outside and inside diameter of sealed bearings.
- Identifying ball bearing has never been easier with this ramped gauge that lets ball bearings roll into their identifying slot.
- Convenient metric and imperial ruler to quickly measure components
Benchtop mat details:
- Durable rubber-like PVC construction. Cleans easily and looks great on any bench
- Overall size 20”x12-¾” (Larger than other mats on the market)
- 12”x9.5” raised work area
- Imperial Ruler 0-12in
- Metric Ruler 0-48cm
- 4 sloped pockets
- 5 deep pockets
- Sealed bearing gauge
- Ball bearing gauge (1/8, 5/32, 3/16, 7/32, 1/4, 5/16)$129.00 (RRP)Add To Cart
-
Stock Code:EVTL-EVTBG30
The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
Or just use it to see how far off your floor pump really is.
Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
*Compatible with Presta valves only. Not compatible with Schrader valves$175.00 (RRP)Add To Cart
-
Stock Code:SWTL-UDPH
Universal Dropper Post Holder | Hands-Free Install & Service
Installing or servicing a dropper post means working on the lever end at the bar while trying not to kink a cable or hose at the post. The Universal Dropper Post Holder locks the post in place so you can see what’s happening at both ends, no third hand required.
What Makes It Different
- All-size compatibility: Works with 27.2, 30.9, 31.6, and 34.9 mm posts. Adapters included; 30.9/31.6 share the same insert for fast swaps.
- TPU strap system: Wide, grippy strap conforms to any post diameter.
- Bleed-through access: Rear service port lets you bleed hydraulic posts (e.g., RockShox) without removing the holder.
- Cable/hose friendly: Elevates and stabilizes the post so housing won’t kink while you work the lever at the bar.
- Bench-ready design: Compact footprint with replaceable adapters, built for daily use in busy workshops.
How to Use
1. Choose the adapter for your post size and drop it into the base.
2. Set the post in the cradle, align the cable/hose path, and secure with the TPU strap.
3. Route and tension the cable (or connect the hose) while operating the lever at the handlebar.
4. For hydraulic posts, position the bleed port over the rear service hole and perform the bleed.
5. When you're done, unstrap it and pull out the tool.$68.00 (RRP)Add To Cart
-
Stock Code:ABTL-TCSOCKET22MM
Suspension service is a specialty within bicycle repair and it takes specialized tools to perform this work. One of the things that any factory tech will tell you is nice to have are sockets specifically made or altered for the low profile hex on the top of each fork leg. The lead in or chamfer on a standard socket will greatly decrease the contact between tool and part and can easily scratch or deform those nuts. For years shops have been grinding down their sockets to remove the chamfer. Problem is you're still often left with a loose fitting socket that is still prone to chewing up those delicate parts. That's why we started from scratch.
We made our sockets from billet aluminum to exacting tolerances to keep these parts in good shape. fully CNC'd machined with zero lead in, they make the specialty that is suspension service a little bit easier. They feature a 3/8" square drive for use with your favorite torque wrench as well as finger splines to help run the top caps into the fork legs with those oil soaked hands. We also kept them short (1" or 25mm for all sizes) to reduce the chance of them caming off of the top cap under torque.
Offered in a 7 individual sizes and a 6 socket set for most modern suspension forks on the market.$53.00 (RRP)Add To Cart
