MKS SYLVAN TRACK PEDAL
MKS Sylvan Track Silver Pedal
Replica design of the classic Campagnolo track pedal. Aluminum body, CrMo spindle. These are very nice, with excellent road clearance. (Track pedals are a minimalist variation on traditional clip-and-strap type pedals, with a cutaway outer portion for better clearance.)
Bearings can be serviced/adjusted in the traditional manner.
The classic. Good for all kinds of riding, especially urban fixed, because of its clearance. Cheap and strong.
Width from arm = 89 mm Weight = 340 grams/pair.
Webshops and Bike shops
Related Products
-
Description
With an improved folding mechanism the FD-7 is now even easier to fold flat against the cranks saving valuable space in tight storage situations. The aggressive footplate improves shoe grip, making sure that you have great purchase on the pedals. The FD-7 has a strong cage and body with durable MKS bearings. Integrated reflectors for safety too.
-Push-pin folding mechanism
-When folded, the horizontal measurement (width of the pedal) is only 43mm
-Weight 402g
-Material Aluminum
-Pedal Spindle 9/16"
-Spindle Material Chromoly -
Description
Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. The design also features a large, tapered leading edge to deflect pedal strikes on rough terrain. A custom radial seal protects three fully sealed cartridge bearings for low-friction riding in all conditions.
- Two sizes: Large is 112mm x 106mm, small is 105mm x 99mm
- Three high-precision, low-friction sealed bearings designed specifically for this pedal, with one igus bushing
- Custom radial seal to protect internal hardware from water, dirt, and trail debris
- Eleven stainless steel, rear-loading 4.5mm pins per side
- Dual Concavity secures your feet firmly in place on the pedals, both front-to-back and side-to-side
- Tapered leading edge deflects pedal strikes.
Weight: Large set 384g | Small set 373g -
Description
The new Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric aluminum platform provides strong foot support for all-mountain riding, while the minimal convex profile is just 7mm thick at the leading edge. These are designed for cyclists who prefer a mid-foot riding position, where the ball of the foot is in front of the pedal spindle and the arch of the foot aligns with the convex arch in the center of the pedal. Inside Ripsaw Aluminum Pedals is a 17-4 stainless steel axle, three sealed cartridge bearings, and one igus bushing with a custom radial seal to protect internal components from trail debris and dirt.
- One size: 118mm long x 102mm wide
- Twelve stainless steel, rear-loading grip pins on each side
- Six extra 4.5mm grip pins included
- Replacement parts and service guides available via Wolf Tooth Right to Repair
- Five-year warranty
- Exceeds all ISO safety standards
- Machined and assembled at Wolf Tooth in Minnesota, USA
Recommended
- Apply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarms.
- Pins can be removed for desired grip by using a 3mm hex tool.
- Includes 6 extra grip pins.
Compatibility
- Fits all standard cranks with 9/16-20 tpi right- and left-hand threads – some kid’s bikes and vintage bikes may have smaller incompatible threads. -
Description
The new Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric aluminum platform provides strong foot support for all-mountain riding, while the minimal convex profile is just 7mm thick at the leading edge. These are designed for cyclists who prefer a mid-foot riding position, where the ball of the foot is in front of the pedal spindle and the arch of the foot aligns with the convex arch in the center of the pedal. Inside Ripsaw Aluminum Pedals is a 17-4 stainless steel axle, three sealed cartridge bearings, and one igus bushing with a custom radial seal to protect internal components from trail debris and dirt.
- One size: 118mm long x 102mm wide
- Twelve stainless steel, rear-loading grip pins on each side
- Six extra 4.5mm grip pins included
- Replacement parts and service guides available via Wolf Tooth Right to Repair
- Five-year warranty
- Exceeds all ISO safety standards
- Machined and assembled at Wolf Tooth in Minnesota, USA
Recommended
- Apply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarms.
- Pins can be removed for desired grip by using a 3mm hex tool.
- Includes 6 extra grip pins.
Compatibility
- Fits all standard cranks with 9/16-20 tpi right- and left-hand threads – some kid’s bikes and vintage bikes may have smaller incompatible threads.Expected Date:30 October 2025 -
Description
Following on from the GAMMA (gravel and mixed surfaces pedal) MKS introduces the Pretzel, incorporating C-shaped die-cast parts for a wider tread surface.
- Eight M4 spike pins per side are placed for grip.
- Maximum thickness of 28 mm including spike pins and 23 mm in the center of the pedal; the concave shape secures the foothold.
- Cup and Cone Bearings
- Alloy
- Size W94 x L114Expected Date:17 October 2025
