Abbey DU Bushing Service Tool
Description
This simple tool is designed to remove and install the static bearing in the shock ends of many modern rear shocks. Machined from durable stainless steel this compact tool allows the user to remove and install the DU bushings without resorting to hammers and punches. The coarse acme thread keeps the constant turning to a minimum. These drifts can also be used with our Micro Bearing Press.
Made in Bend Oregon.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Expected Date:07 May 2026Expected Date:07 May 2026Expected Date:07 May 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:BBTL-MTB32TOStock Code:BBTL-MTB34TOStock Code:BBTL-MTB35/36TOStock Code:BBTL-MTB38TOStock Code:BBTL-MTB40TO$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)
-
Stock Code:WTTL-BBS4116Stock Code:WTTL-BBS4416Stock Code:WTTL-BBS4612Stock Code:WTTL-BBS4816Stock Code:WTTL-BBS5212Stock Code:WTTL-BBS5216
BBS4116: 16 notch BB socket for 41mm diameter notch pattern, Shimano 105, Ultegra BBR60 and 6800, XT MT-800
Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with 7075-T6 aluminum.
- Large finger notches so you can start threading the cups by hand
- 3/8" square socket or 1" hex for ratchet/torque wrench
- Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets
- Steel inserts for magnetic coupling compatibility with the Pack Wrench$70.00 (RRP)$70.00 (RRP)$70.00 (RRP)$70.00 (RRP)$70.00 (RRP)$70.00 (RRP) -
Stock Code:SWTL-DLDSD
Deluxe Fox/Marzocchi Fork Shaft Driver – Damper + Air Side
The upgraded dual-side driver for safely knocking out both damper and air shafts during lower-leg service. One tool replaces two separate Fox drivers.
What It Does:
- One end fits Fox/Marzocchi air shafts
- Other end uses a replaceable threaded tip for damper shafts
- Protects VVC rods / meter rods from impact damage
- Built for rubber mallet or wood block impact (no metal-on-metal)
- Same soft tips as our Basic Driver
Premium feel: larger, more stable body with dual-ended support.$62.50 (RRP)Add To Cart
