- Home /
- Components /
- Handlebars /
- RedShift QR Extensions Aluminium S-Bend
RedShift QR Extensions Aluminium S-Bend
Description
The Quick-Release Aerobars extensions are available in both L-Bend and S-Bend shapes in Aluminum. If you're looking to change your riding position these Quick-Release Aerobar Extensions are the perfect way to fine-tune your fit.
Details:
• Industry standard 22.2 mm diameter extensions fit our Quick-Release Aerobars and many other manufacturer's aerobars
• S-Bend and L-Bend shapes available in aluminum
Webshops and Bike shops
You may also be interested in...
-
Riser bar with extra bend and lots of rise. Try it for bike packing or commuting. Also a bar to look at if your bike feels like it has too much reach or too little stack.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 70mm
– Backsweep: 30 degrees
– Upsweep: 5 degrees
– Weight: 470g
(Not made for aggressive Enduro or DH riding)Stock Level:In StockStock Level:1Stock Level:In Stock$214.00 (RRP)$214.00 (RRP) -
Stock Code:SMHB278035
The Soma Gullwing was designed to be the most natural way to adapt a road bike to flat bars while still retaining your integrated road shift/brake levers.
The bar has a 30mm rise and 25ª backsweep. Harder to see in photos is the 7° drop at the grips which suits a semi-aggressive ride position and puts your wrists in a better angle to operate the levers. The curve for the backsweep also creates the ideal amount of brake lever travel for road levers.
The brake lever hoods can be used as a secondary place to rest your hands and to get more aero. Hood position feels similar to a 38cm road bar, which is fine, since this is not the primary hand position.
Grip section is 22.2mm OD, so you can either run MTB grips or bar tape.
Straight section near the clamp is 110mm wide, which gives some room for accessories or possibly aero bars.
Designed in Japan by Tokyo San Esu.
• Width: 620mm
• Center: 31.8mm OD
• Material: 6061-T6 Aluminum
• Rise: 30mm (with 7° down slope at grips)
• Backsweep: 25°
• Grip OD: 22.2mm
• Lever mounting area OD: 23.8mm
• Weight: 290g
*** Not feasible to use with Campagnolo Ergo levers, L-Twoo, or other models where one of the shifters is on the inboard side of the lever.Stock Level:1Stock Level:1$233.00 (RRP)Add To Cart
-
Stock Code:RSHBRS-60-21Stock Code:RSHBRS-60-26Stock Code:RSHBRS-60-22Stock Code:RSHBRS-60-27Stock Code:RSHBRS-60-23Stock Code:RSHBRS-60-28Stock Code:RSHBRS-60-24Stock Code:RSHBRS-60-29Stock Code:RSHBRS-60-25Stock Code:RSHBRS-60-30
The gravel bike handlebar that has everything but the kitchen sink.
If you are looking for comfort, control, and convenience the Kitchen Sink Gravel Bike Handlebar is for you. With widths from 41cm up to 53cm, these new low flare gravel handlebars can aid stability and control but at the same time provide really comfortable hand positions.
KEY Handlebar Features:
• 20mm of rise means less pressure on the hands and a broad range of fit options to accommodate a variety of gravel riding conditions.
• 7° degrees of sweep means the bar is positioned where your hands want to be, whether you're on the flats, the hoods or the drops during your most epic gravel ride.
• Low Flare (10° degrees) and a compact drop are perfect for road and gravel riders who prefer a more traditional road shaped bar.
Why 10 degrees?
Because it's the right balance between classic dropbar shaping and the ergonomic + comfort advantages of flare. A small amount of flare on performance road bike bars is quickly becoming a very popular option for this very reason.
Loop or Non-Loop?
Choose between two gravel bar styles: LOOP and a more traditional NON-LOOP. The Loop version provides an alternative riding position, a great place to attach gear, and the perfect spot for our custom storage solution: the Kitchen Sink Gravel Handlebar Bag. The bag was designed specifically to fit in the loop and allow easy (single hand) access to all your essentials for bikepacking and long gravel rides. In addition, we created a Computer Mount that attaches to the top of the bag to give you a secure and ideally located spot for your Garmin or Wahoo bike computer.
To get even more comfort and performance out of your Kitchen Sink Gravel Bar, add the ergonomic Cruise Control Grip System. The Top Grips provide an incredibly comfortable position at the tops by expanding the bar and giving you a wide area to rest your hands. And the Drop Grips give you an extra comfortable position while in the drops through an ergonomic style grip that helps spread load over your hands so you can stay in your tuck all day.
Top it all off with some of our Really Long Bar Tape which is specifically designed to be long enough to wrap even the widest gravel handlebar. Oh and it's super comfortable with just the right amount of grip.Stock Level:In StockStock Level:2Stock Level:In StockStock Level:In StockStock Level:1Stock Level:1Stock Level:In StockStock Level:In StockStock Level:1Stock Level:2Stock Level:1$199.00 (RRP)$255.00 (RRP)$199.00 (RRP)$255.00 (RRP)$199.00 (RRP)$255.00 (RRP)$199.00 (RRP)$255.00 (RRP)$199.00 (RRP)$255.00 (RRP) -
Stock Code:RSHBRS-60-21Stock Code:RSHBRS-60-26Stock Code:RSHBRS-60-22Stock Code:RSHBRS-60-27Stock Code:RSHBRS-60-23Stock Code:RSHBRS-60-28Stock Code:RSHBRS-60-24Stock Code:RSHBRS-60-29Stock Code:RSHBRS-60-25Stock Code:RSHBRS-60-30
The gravel bike handlebar that has everything but the kitchen sink.
If you are looking for comfort, control, and convenience the Kitchen Sink Gravel Bike Handlebar is for you. With widths from 41cm up to 53cm, these new low flare gravel handlebars can aid stability and control but at the same time provide really comfortable hand positions.
KEY Handlebar Features:
• 20mm of rise means less pressure on the hands and a broad range of fit options to accommodate a variety of gravel riding conditions.
• 7° degrees of sweep means the bar is positioned where your hands want to be, whether you're on the flats, the hoods or the drops during your most epic gravel ride.
• Low Flare (10° degrees) and a compact drop are perfect for road and gravel riders who prefer a more traditional road shaped bar.
Why 10 degrees?
Because it's the right balance between classic dropbar shaping and the ergonomic + comfort advantages of flare. A small amount of flare on performance road bike bars is quickly becoming a very popular option for this very reason.
Loop or Non-Loop?
Choose between two gravel bar styles: LOOP and a more traditional NON-LOOP. The Loop version provides an alternative riding position, a great place to attach gear, and the perfect spot for our custom storage solution: the Kitchen Sink Gravel Handlebar Bag. The bag was designed specifically to fit in the loop and allow easy (single hand) access to all your essentials for bikepacking and long gravel rides. In addition, we created a Computer Mount that attaches to the top of the bag to give you a secure and ideally located spot for your Garmin or Wahoo bike computer.
To get even more comfort and performance out of your Kitchen Sink Gravel Bar, add the ergonomic Cruise Control Grip System. The Top Grips provide an incredibly comfortable position at the tops by expanding the bar and giving you a wide area to rest your hands. And the Drop Grips give you an extra comfortable position while in the drops through an ergonomic style grip that helps spread load over your hands so you can stay in your tuck all day.
Top it all off with some of our Really Long Bar Tape which is specifically designed to be long enough to wrap even the widest gravel handlebar. Oh and it's super comfortable with just the right amount of grip.Stock Level:In StockStock Level:2Stock Level:In StockStock Level:In StockStock Level:1Stock Level:1Stock Level:In StockStock Level:In StockStock Level:1Stock Level:2Stock Level:1$199.00 (RRP)$255.00 (RRP)$199.00 (RRP)$255.00 (RRP)$199.00 (RRP)$255.00 (RRP)$199.00 (RRP)$255.00 (RRP)$199.00 (RRP)$255.00 (RRP) -
Stock Code:SMHB280142
If you find your current bars were cut too short or designed too short to fit your brake lever and shifter set up, check these out.
Attach these to your bar ends to add 50mm (2") to each side of your bar. Also useful if you want to your cruiser bars to reach back a little farther.
• For city/MTB bars with 22.2mm OD.
• Aluminum constuction
• 50mm of extension per unit
• Comes in black or silver
• DO NOT use on bars that have been partially machined out at the ends (to fit bar end shifters or reverse levers) This includes Soma Oxford, Sparrow and 3-speed II bars
• ID not sized to accept reverse levers or bar end shifters.
• Requires a 6mm hex key (2 inches long) to installStock Level:In StockStock Level:In Stock$42.00 (RRP)Add To Cart