Abbey Fork Seal Press Driver - 36mm
Description
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:PDTL6450658
Versatile professional event tool kit designed around a highly customizable platform ready to get the job done.
Heavy-duty 56 x 35 x 23cm wheeled case is lockable, dustproof (IP6X), waterproof (IP7X), and MIL-spec certified. Features heavy-duty latch closures, 3 ergonomic handles (2 carry, 1 retracting), and automatic pressure release valve, all backed by a lifetime warranty.
Contents include 59 professional quality tools and extensive selection of 1/4" hex bits, a lid-mounted upper panel with a tappable 325-hole array, a multi-position lower case divider panel with 24 additional tappable holes, 50 tool clips in five sizes (14 pre-installed), two heavy duty parts trays with hinged lids, and a Burrito Tool Roll II.
The original professional event tool kit, Pedro's Master Tool Kit has been trusted by mechanics around the world since 2004 and has a track record matched by no other. Building upon this solid foundation, the new 4.0 edition features updates from top to bottom. The kit includes 59 professional tools including many new and updated items, and an extensive selection of 1/4" hex bits, all focused on expanding kit capabilities. The new case is inspired by the latest trends from the pits, rethinking what a travel tool case can be, with thoughtful consideration to allow the flexibility mechanics want and need to customize their personal setups. The new heavy-duty case adds 100+ cubic inches (1640cc) of internal space while the wheeled design with retracting handle and two carry handles adds ease and convenience. The lid-mounted upper panel offers a blank slate ready for your custom tool layout. Use the included tool clips to dial in your setup or add your own personalized touches. The lower case divider panel offers multiple options with two primary positions and three sub-positions for fine tuning fit. It also features an array of holes. Add clips or customizations to secure items to the divider panel in the lower case. The custom parts trays, with removable hinged lids, offer secure storage for small parts and are designed to nest internally on the upper edge of the lower case. When it's time to get to work, the trays mount externally on the case and feature tool slots perfect for staging in-use tools. Finally, the workhorse Burrito Tool Roll II's unique x-frame system quickly converts it from a flexible roll into a rigid tool pallet designed to hang on the front of the 4.0 case. The Burrito Tool Roll II features a large 23x16in (60x40cm) surface with numerous pockets in assorted sizes and types including a large mesh zipper pocket to securely hold small parts or tools. Pack it full, store inside your case rolled up, then unroll, hang on your case, and get to work. Kit weight is 32.5lb (14.7kg).$2,400.00 (RRP)Add To Cart
-
Stock Code:ABTLABTWASHM
The wash buddy clamps firmly into the rear drop out and has the ability to not only hold the chain but allow for full crank rotation and changing of cogs. This allows you plenty of room to clean and inspect your drive train while washing your bike or doing maintenance.
We tested these for over 2 years on the pro circuit to ensure you will have a durable tool for years to come. The stainless spindle will hold up to all of the solvents, water and grit that these tools get soaked in every time you use them. The Delrin pulley has great solvent resistance as well.
Our Delrin pulleys are available separately for use with thru axle bikes. Simply remove your wheel and slide the pulley over your factory thru axle for a nice secure solution. It's a great way to ship bikes as well.
Made in Bend Oregon.$114.00 (RRP)Add To Cart
-
Stock Code:SWTL-DSD
Fox/Marzocchi Basic Damper Shaft Driver. A simple, affordable driver that threads onto the rebound shaft to safely knock the lowers off without damaging rebound or VVC internals.
What It Does:
- Threads onto the rebound shaft (damper side)
- Protects the meter rod, rebound assembly & VVC internals
- Lets you tap out the lowers without metal-on-metal impact
- Soft replaceable plastic tip (cheap + safe)
- Equivalent to Fox 398-00-682
Compatibility:
- Fox 34 / 36 / 38 / 40 – all years (damper side only)
- Marzocchi Bomber forks using Fox internals
- Not compatible with Taper-Cast forks$39.50 (RRP)Add To Cart
