Pedros Crowfoot Pedal Wrench, 3/8" Drive
Description
The Crowfoot Pedal Wrench converts any 3/8" drive torque wrench into a pedal wrench to allow accurate installation torque for pedals with 15mm wrench flats. A perfect add-on for our Grande Torque Wrench.
Use with any 3/8" drive torque wrench to accurately torque pedals with 15mm wrench flats.
Precision laser cut and heat treated tool steel for strength and lasting performance.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-DS-1
Wheels MFG Drop-out savers >7mm wide 2 per
Dropout savers are designed to replace damaged threads in rear derailleur mounts.
Made from aircraft quality steel, dropout savers provide an economical and reliable alternative to the "major surgery" of replacing a complete dropout
• Wide Dropout Saver fits dropouts 7mm or more in thickness
• Narrow Dropout Saver fits dropouts 7mm or less in thickness
• 2 pieces$62.00 (RRP)Add To Cart
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:02 November 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-PRESS-1-HNASSY
Replacement Handle Assembly for our Large Sealed Bearing Press (PRESS-1).
(1) Machined fixed end aluminum "T" Handle with brass insert.
(1) Machined non-fixed end aluminum "T" Handle with brass insert.
(1) 3/8" x 12" Threaded Rod
(1) M5x12 flat head screw to secure fixed-end handle to rodExpected Date:02 November 2026$168.00 (RRP) -
Stock Code:RLTL-LTPK20S
This Is Kit Includes:
1. LTP20 - Loobtoob Pro 20ml Syringe
1. BS514- Small Brush-it Applicator
1. Radar Laboratories Sticker
1. RADLABS Holographic Sticker
1. Set of Replacement Syringe Seals
LTP20 - Loobtoob Pro 20ml Syringe
Crushproof fully featured Pro syringe with a 20ml capacity.
Can contain and dispense almost any semi-solid material.
Luer-Lock fitting accepts any attachment.
Luer-Lock Compatible
Crushproof Premium Construction
Stainless Connection Fitting with O-Ring
Replaceable O-Ring Sealing Plunger
Ergonomic Dispensing Handle
1ml Graduation Marks
Brass Plunger Rod with Dosing / Locking Nut
Includes Loobtoob Label (not applied)
Includes Replacement O-Rings
Guaranteed for life!
BS514- Small Brush-it Applicator
Nylon brush applicator with a small 5x2mm tip, for the most precise projects.
Material dispenses into the brush for clean, convenient one handed application.
For use on freehub bodies, small fasteners, and small mechanisms.
Luer-Lock Compatible
Seamless Stainless Steel
Durable Nylon Bristles
Crushproof Polypropylene Connector
14 gauge Opening for Precise Control
Guaranteed for life!$24.00 (RRP) -
Stock Code:ABTL-SHP-SHPCHNWHP
What good is a Shop Crombie tool without the matching whip?
There's a little more that went into the Shop Duty Whip-It than the matching Crombie. We stuck with the proven construction of a machined tang welded into a handle. We did add some length to the handle, as much as we could while still fitting inside a 700c/29'er wheel and of course it got the matching grip. We also worked with KMC to get some more robust chain from their E bike chain. These chains have a 28% stronger pin design that helps them stay together when your wrist rolls under heavy torque. We also widened the tang everywhere the chain doesn't attached to add stiffness and give the chain more support. Then we heat treat everything to get the most out of the steel.
The other little tweak we did involves magnets. Now we don't pretend to understand how magnets work but they're kind of handy for keeping the chain wrapped around the cassette and keeping the chain stowed when not in use. We're also offering these as parts for the existing Whip-It.
Made in Bend Oregon.$125.00 (RRP)Add To Cart
