Pedros Equalizer Pedal Wrench II
Description
The new and improved Pedro's Equalizer Pedal Wrench II makes quick work of even the toughest pedals and now doubles as a socket driver wrench for use with Pedro's professional socket tools. Features include an extra long, 350mm length, tubular handle with dice grip for control and comfort, heat-treated chrome-moly steel construction for the ultimate strength and lasting performance.
New design with dual 15mm openings and 24mm socket driver.
Features extra long 350mm length and dice grip handle.
Designed to stand up to the harsh conditions of professional use.
Improved ergonomics makes pedal removal easier.
Pedro's lifetime warranty.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:30 October 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:PDTL6463038
Pedals featuring a back-side hexagon broach are now standard on many modern bicycles in 6mm and 8mm sizes. Pedro's led the way with our 8mm hex pedal/crank driver was specifically designed for quick-and-easy pedal and crank installation and removal.
New extra long 27cm hex key and second ball-end deliver leverage and speed.
Specifically designed for quick and easy installation and removal of pedals and cranks.
Ergonomic dual-density screw driver handle.
Designed to stand up to the harsh conditions of professional use.
Backed by Pedro's lifetime warranty.Expected Date:30 November 2026$28.00 (RRP) -
Stock Code:RLTL-SNS880
SNS880 - Sealant and Suspension Hose 8x80mm
Silicone tube is durable and flexible fitting in and over many situations.
Can contain and dispense almost any semi-solid material.
Luer-Lock fitting accepts any attachment.
Luer-Lock Compatible
Silicone construction does not allow fluids to stick
8mm OD fits in many suspension applications
5mm ID fits around tubeless valves
Guaranteed For Life!$12.00 (RRP)Add To Cart
-
Stock Code:ABTL-FITKIT
This set of tools allows accurate and repeatable measurements for saddle height, angle and setback. The accuracy and repeatable measurements also serve as a base to make adjustments to fit.
The magnetic saddle height bullets (8mm and 10mm sizes) ensure you get an accurate center at the bottom bracket by locating in the crank arm fixing bolt or the crank arm preload cap of Shimano caps. This allows you to focus on the smart end of the tape measure at the saddle plate.
Two reference marks on the saddle plate means you can pull a measurement to the exact same spot relative to the nose of the saddle every time. This gives you accuracy down to a single millimeter, enough to satisfy the most particular or injury prone athlete.
The front of the saddle plate is engraved with a ruler (metric of course) to allow you to calculate saddle setback at the saddle. This allows you to drop the plumb bob off the side of the bike and clear all of the bottle cages.
The wide plate has ample room to mount a level, protractor or smart phone for adjusting the angle of the saddle. This is particularly helpful for non traditional saddles like SMP and Adamo. This kit is ideal for cyclists that travel and regularly have to re-assemble their bike, bike fitters and mechanics in the workshop and in the field.
The complete kit includes the saddle plate, Shimano preload crank tool, two saddle height bullets (8mm and 10mm). The Shimano preload crank tool and saddle height bullets can be purchased separately.
Made in Bend Oregon.$266.00 (RRP) -
Stock Code:ABTL-STD-CHAINTOOL
After two years of design, testing, revisions, more testing, and more tweaking, Abbey Bike Tools Chain Tool is dialed and ready to put a wide eyed grin on your face. We broke over 10,000 chains on a single tool and pin during the development of the new tool. That's 3 chain installs a day every day for a decade, hence the name "Decade".
The threaded body and lead screw are made from cro-moly and receive a low friction powder vapor deposition (PVD) coating to give it a silky feel you've never felt in a chain tool before. The nice large handles ensure ease of use with any chain. The freely rotating pin is made from a shock rated tool steel and will likely last as long as the rest of the tool. The chain tool comes with a spare chain pin in the handle and they are cross compatible with Shimano and Campagnolo pins should you find yourself in a pinch.
The greatest part of the chain tool has to be the interchangeable mid plate though. The saddled part that holds the chain in position can be swapped to work with nearly anything the industry comes out with. This ensures that your investment won't become obsolete when company "X" comes out with an 18 speed cassette in 20 years.
The tool also peens Campagnolo 11 and 12 speed chains to factory specs using a backstop that threads into the backside of the tool as a stop.
Compatible with 9-13 speed chain including the new 12 and 13 speed chains from Campagnolo and Shimano's XTR 9100. Mid Plates for 1/8" single speed chains and SRAM AXS group are available in the parts section.
Made in Bend Oregon.$342.00 (RRP)Add To Cart
