Pedros Pro Travel Pedal Wrench
Description
Pulling inspiration from our shop wrenches, and using the same laser cut tool steel construction, the Pro Travel Pedal Wrench makes quick work of tough pedals and now doubles as a socket driver for use with Pedro's professional socket tools.
Made from laser cut tool steel heat-treated for strength and lasting performance.
New design features 24mm socket driver for use with Pedro's professional socket tools.
290mm length and ergonomic shape provide excellent leverage and comfort.
Smaller lightweight design perfect for travel and the toolbox.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:BBTL-MTB32TOStock Code:BBTL-MTB34TOStock Code:BBTL-MTB35/36TOStock Code:BBTL-MTB38TOStock Code:BBTL-MTB40TO$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)$64.93 (RRP)
-
Stock Code:ABTL-SLPRS-DRVR38MM
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.$56.00 (RRP) -
Stock Code:ABTL-HAMMERTI-SFTFC
The soft face on the Titanium Hammer is destined to be gouged, get worn down, or even melt (if you leave it near heat).
Here is the replacement to make the hammer like new.
USA Made.$19.00 (RRP)Add To Cart
-
Stock Code:ABTL-STD-CCLT
New equipment often requires new tooling to support it. When Campagnolo came out with the latest single chainring grouppo they choose to use a lockring to attach the chainring which needs a specific tool. While they could have manufactured the tool in house they choose to focus on making the parts and leave the tools to us.
This tool is specifically made for use with modern Campagnolo crank lockrings found on their power meter cranks for 13spd and the new single chainring Super Record X (SRX).
- Socket is built to engage the 4 prong lockring on these cranks that retains the chainring or spider.
- Features a dual drive giving the technician the option of using a box end wrench (19mm or 3/4") or a 3/8" square drive for use with a torque wrench.
- Slips over the crank axle using it as a pilot to ensure good tool engagement.
Made in Bend Oregon$125.00 (RRP)
