- Home /
- Components /
- Handlebars /
- KSink Handlebar - 41cm 10 Deg Flare
KSink Handlebar - 41cm 10 Deg Flare
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SMHB27869Stock Code:SMHB27872Stock Code:SMHB27801
The Sparrow is a touring/townie bar. The 490mm version is more agile for squeezing through traffic than other townie/MTB bars. The 520mm is still narrow, but with a grip area that fits levers and shifters. The 560mm size is better for climbing and single-speeders. Try all the sizes on a single-speed or fixie. Can be used flipped to be used as a riser bar or down for a less upright position.
- Shotpeened Tange Aluminum
- Widths: 560 mm, 520mm or 490mm
- Silver or Black
- 25.4 mm clamp diameter
- 50mm drop/rise
- 22.2mm grip diameter, 20.0mm inside diameter at ends to allow use of pursuit levers.
- Weight 245gStock Level:2Stock Level:Out of StockStock Level:2Stock Level:Out of StockExpected Date:16 April 2026Expected Date:16 April 2026$170.00 (RRP)$170.00 (RRP)$170.00 (RRP) -
Stock Code:TNHB-HB-E115Stock Code:TNHB-HB-E132Stock Code:TNHB-HB-E133Stock Code:TNHB-HB-E134
800mm wide, 20mm of rise, 9° of backsweep and 5° of upsweep. Built using 7050 Aluminum alloy for strength and long life. 65mm wide clamping area to fit our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 center section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems
Bar is butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground.
Bar is produced by advanced CNC bending to avoid the need for hand grinding. Almost all other bars are manually bent and bends are ground to appear smooth. CNC bending ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high.
Weight 295 g
The perfect addition to your Elite X4 Stem or Direct Mount Stem.Stock Level:In StockStock Level:2Stock Level:1Stock Level:In StockStock Level:1$199.00 (RRP)$215.00 (RRP)$215.00 (RRP)$215.00 (RRP) -
Stock Code:SLHB-HB0101Stock Code:SLHB-HB0102Stock Code:SLHB-HB0103
The Surly Corner Bar is for off-road riders who want to give drop bars a try without swapping out the drivetrain and brake levers on their current mountain setup. Does that make it an economical option for fresh excitement on the trail? Yes, it does.
- Chromoly steel with custom-butted tubing
- 46cm, 50cm, and 54cm widths
- 22.2mm grip diameter
- 25.4mm clamp diameter
- One set of 25.4/31.8 x 60mm Problem Solvers shims includedStock Level:In StockStock Level:In StockStock Level:Out of StockStock Level:Out of StockPOAPOAPOA -
Stock Code:WSHB-HB0363
Whisky’s all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar’s flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories.
- Compound flare — 12 degrees at the hoods and 20 degrees through the drops
- Drop/Reach: 100mm/68mm
- 31.8 clamp diameter
- Di2 compatible with bar end junction for 1x drivetrain setupsStock Level:In StockStock Level:In Stock$525.00 (RRP)POA -
Stock Code:RSHBRS-60-04Stock Level:2Stock Level:2$255.00 (RRP)
Add To Cart