KSink Handlebar - 53cm / WITH Loop / 25'
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SMHB27544Stock Code:SMHB27548Stock Code:SMHB27556Stock Code:SMHB27527Stock Code:SMHB27540Stock Code:SMHB27541Stock Code:SMHB27546Stock Code:SMHB27549Stock Code:SMHB27550Stock Code:SMHB27553Stock Code:SMHB27554Stock Code:SMHB27524Stock Code:SMHB27525
Road bar with a round compact bend and shallow drop. Shape makes it easy to get into a natural position in the drops and brake levers are within easy reach.
- 6061-T6 aluminum
- Drop: 130mm
- Reach: 75mm$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP) -
Stock Code:TNHB-HB-E116
A flat bar with an off center clamp area allowing a flat riding position and reversible for an 8mm drop for 29 inch bikes. 8° of backsweep for comfort. 730mm (29?) in width for plenty of leverage.
Bars are made with three different fiber types with different tensile strength and tensile modulus, including High Strength carbon fibers. This helps to allocate stiffness and flex where needed.
Bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to uni directional fibers from shortening the bar or impact with the ground.
Weight 185g
*NOT SUITABLE FOR BAR ENDS$320.00 (RRP) -
Stock Code:TNHB-HB-E115Stock Code:TNHB-HB-E132Stock Code:TNHB-HB-E133Stock Code:TNHB-HB-E134
800mm wide, 20mm of rise, 9° of backsweep and 5° of upsweep. Built using 7050 Aluminum alloy for strength and long life. 65mm wide clamping area to fit our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 center section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems
Bar is butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground.
Bar is produced by advanced CNC bending to avoid the need for hand grinding. Almost all other bars are manually bent and bends are ground to appear smooth. CNC bending ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high.
Weight 295 g
The perfect addition to your Elite X4 Stem or Direct Mount Stem.$199.00 (RRP)$215.00 (RRP)$215.00 (RRP)$215.00 (RRP) -
Stock Code:WMHB-HS-4Stock Code:WMHB-HS-5Stock Code:WMHB-HS-6$32.00 (RRP)$32.00 (RRP)$32.00 (RRP)
