MTX GoldL HDPads-Shimano Deore 2 piston
Description
This model fits the following Shimano and TRP brakes:
Shimano Deore BR-M525, BR-M515, BR-M375, BR-M415, BR-M416, BR-M446, BR-M465, BR-M475, BR-M485, BR-M486, BR-M495, BR-M575, MT-500
Promax Decode R
Webshops and Bike shops
You may also be interested in...
-
Stock Code:PCBR-030BLACKStock Code:PCBR-030POLISHStock Code:PCBR-030PURPLEStock Code:PCBR-030SILVER
The Short Pull Touring Canti is a powerful cantilever brake with a similar design to the Neo-Retro, but with the arms angled upward. This gives the brake a much narrower profile without significantly reducing stopping power.
The narrower profile of the Touring Canti can be desirable if you’re riding with large panniers or if your current brakes don’t give you enough heel or calf clearance.
The arms of the Touring Canti are machined from lightweight 6061 aluminum. Their T-shaped cross section prevents the brake from flexing too much under load.
The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine-tuned thanks to the spherical washers on the brake pads’ threaded posts.
Like all of Paul brakes, the Touring Canti has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you’re riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing.$244.00 (RRP)$310.00 (RRP)$244.00 (RRP)$244.00 (RRP) -
Stock Code:PCBR-065BLACKStock Code:PCBR-065POLISHStock Code:PCBR-065PURPLEStock Code:PCBR-065SILVERStock Code:PCBR-060POLISHStock Code:PCBR-060PURPLEStock Code:PCBR-060SILVER
The Compact Love Lever is a lightweight long-pull brake lever designed for comfortable two-finger operation.
Dual sealed-cartridge bearings provide maximum power and rigidity with zero slop, while the reach adjustment screw and oversized barrel adjuster allow you to easily dial in ergonomics.
Machined to the highest tolerances in Chico California.$364.00 (RRP)$439.00 (RRP)$364.00 (RRP)$364.00 (RRP)$439.00 (RRP)$364.00 (RRP)$364.00 (RRP) -
Stock Code:MTBRRL160
This model fits the following:
2-piece 2-piston caliper
Level,
Level T, TL, TLM, Ult,
Level Stealth 2-piston,
Red,
Force,
Rival AXS
SRAM Level (not Level Ultimate or Level TLM – those are either RL170)
Avid Elixir 3, 5, R, CR, CR Mag, X7, X9, X0, XX.
**These fit exactly the same as the RL165. The RL165 is what SRAM® considers the aftermarket model; the RL160 is OE. Again, they fit identically.$65.00 (RRP)Add To Cart
-
Stock Code:MTBRRL255$65.00 (RRP)
-
Stock Code:PCBR-025BLACK
The award-winning MiniMoto is our short-pull mini-v-brake for use with most short pull road or cantilever brake levers.
We absolutely love it, as does anyone who’s ever ridden one. Maximum tyre clearance is around 44-45ish without fenders.
Like the Motolite brake, the MiniMoto is a direct pull cantilever brake, but short-pull. This design is simpler to install than a traditional cantilever brake, requires no cable hangers, and gives the MiniMoto a narrow profile. This design is also extremely powerful!
The arms of the MiniMoto have been shortened to match the leverage of standard Shimano and SRAM road brake levers, making the MiniMoto compatible with drop bar brake levers and with most integrated shifters. Please note these are not compatible with Campy road levers, which use an even shorter cable-pull ratio.
PLEASE NOTE BRAKES ARE SOLD PER WHEEL.$371.00 (RRP)
