Teravail Lytho Bar 800x31.8x20mm
Description
Lytho is our dependable, down-for-whatever trail bar that’s built to be capable and comfortable whether you’re sessioning singletrack with your friends or deep into a days-long bikepacking trip. These 20mm rise bars feature an 11-degree backsweep and 6-degree upsweep for a riding position that’s sustainable for all-day riding. Its 100mm clamping area leaves plenty of space for your computer, lights, and other accessories — even bikepacking bags if you’re going the distance. Make Lytho your next upgrade.
6061-T6 aluminum alloy construction
20mm rise
11-degree backsweep, 6-degree upsweep
800mm width
31.8mm clamp diameter
100mm-wide clamping zone to mount accessories
Tested to ISO 4210 MTN for off-road riding and jumps less than 24 inches
Graduated lines for easy trimming
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMHB-JAR-PLUG
Wheels MFG Jar o' plugs Handlebar plugs 150 pce
-120 large plugs - 7/8" diameter
- 30 small plugs - 3/4" diameter$185.00 (RRP) -
Stock Code:TNHB-HB-E115Stock Code:TNHB-HB-E132Stock Code:TNHB-HB-E133Stock Code:TNHB-HB-E134
800mm wide, 20mm of rise, 9° of backsweep and 5° of upsweep. Built using 7050 Aluminum alloy for strength and long life. 65mm wide clamping area to fit our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 center section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems
Bar is butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground.
Bar is produced by advanced CNC bending to avoid the need for hand grinding. Almost all other bars are manually bent and bends are ground to appear smooth. CNC bending ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high.
Weight 295 g
The perfect addition to your Elite X4 Stem or Direct Mount Stem.$199.00 (RRP)$215.00 (RRP)$215.00 (RRP)$215.00 (RRP) -
Stock Code:SMHB278031Stock Code:SMHB278032
Riser bar with extra bend and lots of rise. Try it for bike packing or commuting. Also a bar to look at if your bike feels like it has too much reach or too little stack.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 70mm
– Backsweep: 30 degrees
– Upsweep: 5 degrees
– Weight: 470g
(Not made for aggressive Enduro or DH riding)$214.00 (RRP)$214.00 (RRP) -
Stock Code:SMHB280144
If you find your current bars were cut too short or designed too short to fit your brake lever and shifter set up, check these out.
Attach these to your bar ends to add 50mm (2") to each side of your bar. Also useful if you want to your cruiser bars to reach back a little farther.
- For city/MTB bars with 22.2mm OD.
- Aluminum constuction
- 50mm of extension per unit
- The resulting fit is not perfectly seamless, but good enough to where it should feel normal after grips are installed.
- DO NOT use on bars that have been partially machined out at the ends (to fit bar end shifters or reverse levers) This includes Soma Oxford, Sparrow and 3-speed II bars
- ID not sized to accept reverse levers or bar end shifters.
- Requires a 6mm hex key (2 inches long) to install$112.00 (RRP)Add To Cart
-
Stock Code:NTHB-M137AA-318-50-SL
The Nitto M137 Dirt Drop Handlebar looks similar to the current crop of Gravel bars but with more flare at the drops and with the smooth curves and nice finish you expect from Nitto.
- Reach: 78mm
- Drop: 128mm
- Clamp 31.8
- Heat Treated Aluminium
Made in Japan.$158.00 (RRP)
