BlackBearing Bushing Bosch Axle Gen4
Description
This bushing is designed to be installed on the crankset axle of the Gen 4 Bosch motor.
It is strongly recommended replacing both bushings per motor for optimal performance.
When the friction bushings wear out, play may develop in the crankset axle, even after replacing the bearings included in the EM-026-BOSCH service kit (or with individual bearing replacements). As this part is not sold separately by Bosch, their official recommendation is to replace the entire motor unit when axle play occurs.
BlackBearing offer an alternative!
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-BB-0.7Stock Code:WMBB-BB-1.8Stock Code:WMBB-BB-2.5
Aluminum spacer for ISO/English or BSA threaded bottom brackets. Spacers fit between bottom bracket cup and frame. Great for fine tuning bottom bracket shells or improving chainline.
Outer Diameter: 40.7mm
Inner Diameter: 34.9mm
Thickness: 1.8mm
Machined aluminum
Anodized Black
Sold 1 spacer per bagExpected Date:07 May 2026$13.00 (RRP)$13.00 (RRP)$13.00 (RRP) -
Stock Code:BBBB-46-73A-P-B5
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.$169.60 (RRP)Add To Cart
-
Stock Code:BBBB-ADAPTER-D$17.73 (RRP)
Add To Cart
-
Stock Code:WMBB-BB86-30-BO
BB86 TO 30MM FLANGED, DUAL ROW PRESSFIT 86/92 BOTTOM BRACKET
Expand your choice of cranks for use in BB86/BB92/BB91/BB71-41/BB107 frames. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks (FSA BB386EVO, Rotor 3d+, RaceFace Next SL, e.thirteen) cranks in your BB86/92 frame. These bearings fit directly in frames with 41mm ID smooth bore bottom bracket shells.You must use 30mm spindle cranksets with spindle lengths longer than 104mm
Complete kit for one frame
Includes:
(2) - Enduro BB86 to 30MM Dual-Row ABEC-3 Black Oxide Bearing
(2) - 0.5mm crank spacer
(2) - 1.0mm crank spacer
(2) - 5.0mm crank spacer
(2) - Dust seals$156.45 (RRP) -
Stock Code:CKBB-ABB1Stock Code:CKBB-ABR1Stock Code:CKBB-ABS1Stock Code:CKBB-ABM2Stock Code:CKBB-ABT2Stock Code:CKBB-ABBFStock Code:CKBB-ABP1Stock Code:CKBB-ABZ2Stock Code:CKBB-ABG2Stock Code:CKBB-ABB2
** FIT KIT REQUIRED FOR USE **
ThreadFit 30 comes with a Center Sleeve for 73mm BB shell. For 68mm shell - sleeve is required(included in Fit Kit #2 for DUB Road cranks).
ThreadFit 30 bottom bracket is silky smooth and long-lasting thanks to legendary, angular-contact bearings. They actually get faster over time as their contact surfaces wear, because they are build to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag and butter smooth feel come from.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use
- Uses Chris King bottom bracket cup tool for installation$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$399.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)
