Soma Handlebar Extender 50mm Silver
Description
If you find your current bars were cut too short or designed too short to fit your brake lever and shifter set up, check these out.
Attach these to your bar ends to add 50mm (2") to each side of your bar. Also useful if you want to your cruiser bars to reach back a little farther.
- For city/MTB bars with 22.2mm OD.
- Aluminum constuction
- 50mm of extension per unit
- The resulting fit is not perfectly seamless, but good enough to where it should feel normal after grips are installed.
- DO NOT use on bars that have been partially machined out at the ends (to fit bar end shifters or reverse levers) This includes Soma Oxford, Sparrow and 3-speed II bars
- ID not sized to accept reverse levers or bar end shifters.
- Requires a 6mm hex key (2 inches long) to install
Webshops and Bike shops
You may also be interested in...
-
Stock Code:TNHB-HB-E130Stock Code:TNHB-HB-E131
Our aluminum drop bars bring the performance, and dependability you have come to expect from Thomson. The lineup is available in 3 profiles, and varying widths. Each made from 7000 series aluminum. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.
Our road bar wing section is small enough not to restrict hand movements when riding on the top, and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.
The Dirt drop is available in 44cm, and 46cm, a wide drop bar with 25° flare, 130mm REACH.
Ready for your next adventure, regardless of the road you choose.$220.00 (RRP)$220.00 (RRP) -
Stock Code:TNHB-HB-E115Stock Code:TNHB-HB-E132Stock Code:TNHB-HB-E133Stock Code:TNHB-HB-E134
800mm wide, 20mm of rise, 9° of backsweep and 5° of upsweep. Built using 7050 Aluminum alloy for strength and long life. 65mm wide clamping area to fit our Direct Mount stem, giving you the most torsional stiffness of any bar/stem combination. 31.8 center section is absolutely straight over a width of 90mm. The long straight section in the middle reduces stress concentrations, especially when using wide Direct Mount stems
Bar is butted and tapered in many steps for optimal fatigue life. Ends of the bar are thickened from 1.4 to 1.6mm to resist damage from impacts and contact with the ground.
Bar is produced by advanced CNC bending to avoid the need for hand grinding. Almost all other bars are manually bent and bends are ground to appear smooth. CNC bending ensures very consistent wall thickness and close tolerances, especially in tapered sections. This keeps weight low and fatigue life high.
Weight 295 g
The perfect addition to your Elite X4 Stem or Direct Mount Stem.$199.00 (RRP)$215.00 (RRP)$215.00 (RRP)$215.00 (RRP) -
Stock Code:SAHB-HB8257Stock Code:SAHB-HB8258
Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24 degree flare in the drops boosts leverage, stability, and comfort dramatically.
- Lightweight and strong 7050-T76 series alloy construction with polished finish
- Drop/Reach: 116/68mm
- 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars
- 24 deg flare and 12 deg drop angles$190.34 (RRP)POAPOA -
Stock Code:SAHB-HB8267
Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12-degree flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops.
- Lightweight and strong 7050-T76 series alloy construction with polished finish
- Drop/Reach: 115/68mm
- 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars
- 12 deg flare and drop angles$190.34 (RRP)POA -
Stock Code:SLHB-HB0101Stock Code:SLHB-HB0102Stock Code:SLHB-HB0103
The Surly Corner Bar is for off-road riders who want to give drop bars a try without swapping out the drivetrain and brake levers on their current mountain setup. Does that make it an economical option for fresh excitement on the trail? Yes, it does.
- Chromoly steel with custom-butted tubing
- 46cm, 50cm, and 54cm widths
- 22.2mm grip diameter
- 25.4mm clamp diameter
- One set of 25.4/31.8 x 60mm Problem Solvers shims includedPOAPOAPOA
