Juice Lubes Dirty Little Scrubber Chain
Description
The Dirty Little Scrubber goes heavy on clean chains and crisp shifts and light on mess, spills and faff. Slap it on your chain whenever you wash your whip and watch your drivetrain transform from ghastly to glorious in a few spins of the cranks.
Best paired with our Dirt Juice Boss Chain Cleaner liquid, this dirty duo will strip your chain of grease and grime in seconds, ready for a quick rinse and a fresh coat of lube.
Please note: The Dirty Little Scrubber is not compatible with wide track or BMX type chains.
Quick and easy to use no hands chain cleaner.
The Dirty Little Scrubber hangs on the lower chain and a hook bar swings up behind the jockey wheel so when you back pedal the cranks, the cleaner stays in place. The fact that you dont have to hold the cleaner with one hand brings 3 main advantages
1) It finds its own position of least resistance, so you dont get annoying chain suck when back pedalling the cranks - this is assuming that you have it in a gear that backpedals freely in the first place!? With hand held cleaners, it is all too easy to twist or tilt the cleaner which inhibits the free movement of the chain through the cleaner.
2) You can use one hand to the hold the bike up and the other hand to turn the crank, so you dont need a workstand to hold the bike steady
3) Because it is easier and more convenient to use, you are more likely to clean your chain more regularly which will increase the lifespan of your drive train and keep it operating more smoothly which makes your riding more enjoyable!!
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:JLTL-JRAG1
The Juice Rag is a microfibre cloth that’ll transform your bike from rags to riches. It’s your best buddy for the finishing strokes of your bike wash, polishing those fine details to perfection.
Big and tough, yet soft and smooth, the Rag is great for buffing and burnishing, wiping up spills and giving everything a good rub down. The Juice Rag is machine washable, heavy duty and super absorbent.
Washing instructions: Wash separately at 40°C, do not use fabric conditioner, do not machine dry.Was:$16.00 (RRP)Now:$12.32 (RRP)Price:$12.32 (RRP)Add To Cart
-
Stock Code:WMTL-SS-30Stock Code:WMTL-SS-15-25Stock Code:WMTL-SS-17-25Stock Code:WMTL-SS-17-35
Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. 15mm thru hole size makes this perfect for use on hubs with larger axles.
Compatible with:
PRESS-4 - Economy Press
PRESS-1 - Large Sealed Bearing Press
PRESS-1 Handle & Rod Assembly
Length: 25mm
OD: 23.8mm
ID: 15.1mm
Machined Aluminum
*Sold individually$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:BBTL-TO-TOOLHEADSET
This stainless steel tool is used to measure the angle of the headset’s bearings
There are 4 measure points: 36° and 45° inside and 36° and 45° outside.$43.74 (RRP) -
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP)
