Chris King R45D Gen4 MS Conkit 142mm Blk
Description
Convert your R45D 6 Bolt Gen. 2 and R45D Centerlock hubs to fit Shimano Micro Spline.
Gen 4 conversion kits include a pre-assembled axle, driveshell, and updated adjusting clamp for a plug and play swap. Installation requires a 2.5mm hex key and T10 Torx tool.
- Compatible with R45D 6-Bolt Gen.2 hubs. Serial numbers will begin with 6910.
- Compatible with all R45D Centerlock hubs. Serial numbers will begin with 6710.
- 142x12mm axle.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKWA-PHB710Stock Code:CKWA-PHB736Stock Code:CKWA-PHB735BStock Code:CKWA-PHB735Stock Code:CKWA-PHB642Stock Code:CKWA-PHB648Stock Code:CKWA-PHB646Stock Code:CKWA-PHB641Stock Code:CKWA-PHB645Stock Code:CKWA-PHB768Stock Code:CKWA-PHB720Stock Code:CKWA-PHB761Stock Code:CKWA-PHB718Stock Code:CKWA-PHB755Stock Code:CKWA-PHB572Stock Code:CKWA-PHB523Stock Code:CKWA-PHB762Stock Code:CKWA-PHB752Stock Code:CKWA-PHB721Stock Code:CKWA-PHB566Stock Code:CKWA-PHB719$61.72 (RRP)$65.00 (RRP)$76.00 (RRP)$76.00 (RRP)$144.83 (RRP)$153.00 (RRP)$153.00 (RRP)$144.83 (RRP)$153.00 (RRP)$37.85 (RRP)$40.50 (RRP)$153.00 (RRP)$153.06 (RRP)$41.14 (RRP)$184.00 (RRP)$8.55 (RRP)$161.28 (RRP)$41.14 (RRP)$51.50 (RRP)$32.50 (RRP)$40.50 (RRP)
-
Stock Code:WTWAF-AXL12-120-150-BLKStock Code:WTWAF-AXL12-125-150-BLKStock Code:WTWAF-AXL12-122-175-BLKStock Code:WTWAFA15-100-FXStock Code:WTWAFA15-100-SRStock Code:WTWAAXLE15-110-FXStock Code:WTWAAXLE15-110-FX-GRNStock Code:WTWAAXLE15-110-FX-REDStock Code:WTWAFA15-110-FXStock Code:WTWAFA15-110-FX-BLUStock Code:WTWAFA15-110-FX-ORGStock Code:WTWAAXLE15-110-SR-PRPStock Code:WTWAFA15-110-SRStock Code:WTWAFA15-110-SR-REDStock Code:WTWAAXLE15-150-SRStock Code:WTWAFA15-150-SR
Looking for a front axle that is easy to use, lightweight and looks great? Wolf Axle is the perfect fit. Available in a variety of colors and standard or Boost spacing. Easily installed with a 6 mm hex key.
Unlike other similar products, Wolf Axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles.
Always apply a small amount of grease to the washer and threads when installing.
Compatibility
- Fox suspension forks
- 100 mm (standard) or 110 mm (Boost) with the below exceptions
- Not compatible with 2021 Fox F36 and F38 forks
- Similar to Fox Kabolt axle but with more color choices and beautiful Wolf Tooth design.$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$83.92 (RRP)$53.02 (RRP)$83.95 (RRP)$83.92 (RRP)$94.43 (RRP)$94.43 (RRP) -
Stock Code:SLWA-HU0000POA
-
Stock Code:CKWA-PHB831B
Convert your existing Chris King mountain hub to XD with a new driveshell.
- Compatible with all ISO or Centerlock mountain rear hubs with twin-bearing axles.
- Installation requires a T10 Torx and Park Tool FR-1.3 (or equivalent)
- Refer to the Boost Centerlock Service Video for driveshell removal and installation instructions.
If you have an ISO hub with a needle-bearing axle & driver, you will need a Twin-Bearing Conversion Kit.$153.00 (RRP) -
Stock Code:BTWA-BT-TA-R-603
173mm axle length, M12x1.5
Fits:
- Bombtrack HOOK 3 2016/17/18
- Bombtrack TENSION 3 2019
- Bombtrack TENSION C 2020
- Bombtrack HOOK 2 2017/18/19
- Bombtrack HOOK EXT 2017/18/19
- Bombtrack TEMPEST DISC 2017
- Bombtrack HOOK WMN 2018/19
- Bombtrack BEYOND 1 2018/19
- Bombtrack BEYOND XPD 2018
- Bombtrack BEYOND TEMPEST 2018/19
- Bombtrack TEMPEST WMN 2018/19
- Bombtrack AUDAX 2018/19
- Bombtrack HOOK ADV 2019
- Bombtrack HOOK EXT-C 2018/19$69.95 (RRP)Add To Cart
