- Home /
- Components /
- Handlebars /
- Surly Sunset Bar 110x820mm
Surly Sunset Bar 110x820mm
Description
We set out to make a handlebar that’s upright, durable, and capable of resurrecting a parts-bin bike or transforming a newer slice of steel into something more. What we came up with is the Sunset Bar. We liken it to its sibling, the Sunrise Bar, with BMX-inspired style and vertical posture. Procure one yourself for a fresh take on front end grip.
- Constructed with 4130 Chromoly Custom-Butted Steel tubing for enhanced strength and comfort, and finished in an anti-rust Black ED coat for longevity
- Brings comfort, style, and durability by fitting a more upright position with 110mm of rise, 22-degree backsweep, and 14-degree upsweep
- Adds height to frames with short steerer tubes or headtubes
- Tested to comply with ASTM 3 and ISO Mountain Standards for rowdy trail riding and beyond
Webshops and Bike shops
You may also be interested in...
-
A flat bar with an off center clamp area allowing a flat riding position and reversible for an 8mm drop for 29 inch bikes. 8° of backsweep for comfort. 730mm (29?) in width for plenty of leverage.
Bars are made with three different fiber types with different tensile strength and tensile modulus, including High Strength carbon fibers. This helps to allocate stiffness and flex where needed.
Bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to uni directional fibers from shortening the bar or impact with the ground.
Weight 185g
*NOT SUITABLE FOR BAR ENDSStock Level:Out Of StockStock Level:Out of Stock$320.00 (RRP) -
Thomson Cyclocross 42x31.8 Carbon
Clipon compatible keep all accessory clamps inside the area marked on the bar as safe for clamping. 90mm total safe clamp area available.
For Cyclocross we present the carbon CX bar. The natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a completely round bar when wrapped. Top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
Reach 78.5mm. Drop is proportional.
Cross drops are: 40CM 131mm, 42CM 133mm, 44CM 135mm.Stock Level:1Stock Level:1$355.00 (RRP) -
Stock Code:SLHB-HB0100
If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that’s your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don’t you worry. We added cut marks so you can easily make it so.
- Material: CroMoly steel
- Clamp diameter: 31.8mm
- Width: 735mm; Cut marks for 685mm
- Rise: 27mm
- Sweep Angle: 34 degrees
- Weight: 709g
- Color: BlackStock Level:In StockStock Level:In Stock$215.00 (RRP)POA -
Our aluminum drop bars bring the performance, and dependability you have come to expect from Thomson. The lineup is available in 3 profiles, and varying widths. Each made from 7000 series aluminum. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.
Our road bar wing section is small enough not to restrict hand movements when riding on the top, and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.
The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm
The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm
The Dirt drop is available in 44cm, and 46cm, a wide drop bar with 25° flare ready for your next adventure, regardless of the road you choose.Stock Level:In StockStock Level:In StockWas:$230.00 (RRP)Now:$165.00 (RRP)Price:$165.00 (RRP) -
Stock Code:SMHB278032
Riser bar with extra bend and lots of rise. Try it for bike packing or commuting. Also a bar to look at if your bike feels like it has too much reach or too little stack.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 70mm
– Backsweep: 30 degrees
– Upsweep: 5 degrees
– Weight: 470g
(Not made for aggressive Enduro or DH riding)Stock Level:Out Of StockStock Level:Out of StockExpected Date:06 May 2025$210.00 (RRP)