BlackBearing B5 BBRIGHT 25mm Campagnolo
Description
The Blackbearing bottom bracket range has been specifically developed to withstand the most extreme conditions.
The BBlock technology (built in 2 threadable parts) allows a better alignment of the casing in its assembly offering several advantages:
- minimizes possible cracks
- greater protection to the bearing extending its useful life
- an easier replacement of the bearing.
CNC machined aluminum.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-BB-BSA30-BB
Our solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable.
Notes:
*For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm (BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide).
*Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH!
*Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).$184.00 (RRP) -
Stock Code:WMBB-WAVEWSH-24MM-10Stock Code:WMBB-WAVEWSH-30MM-10
Used to take set proper side-load in PF30, BB30 and similar bottom bracket systems when using 30mm, 24mm (Shimano, FSA, etc.) or 22/24mm (SRAM/TruVativ) spindle cranks.
- Choose from 30mm I.D. or 24mm I.D.
- Sold 10 washers per bag$45.00 (RRP)$45.00 (RRP) -
Stock Code:CKBB-ABB1Stock Code:CKBB-ABR1Stock Code:CKBB-ABS1Stock Code:CKBB-ABBYStock Code:CKBB-ABY1Stock Code:CKBB-ABM2Stock Code:CKBB-ABT2Stock Code:CKBB-ABP1Stock Code:CKBB-ABZ2
** FIT KIT REQUIRED FOR USE **
ThreadFit 30 comes with a Center Sleeve for 73mm BB shell. For 68mm shell - sleeve is required(included in Fit Kit #2 for DUB Road cranks).
ThreadFit 30 bottom bracket is silky smooth and long-lasting thanks to legendary, angular-contact bearings. They actually get faster over time as their contact surfaces wear, because they are build to ultra-tight aerospace tolerances, using machined, Delrin-spindle sleeves to create a perfect, and precise fit between cranks and frame. That’s where the low drag and butter smooth feel come from.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use
- Uses Chris King bottom bracket cup tool for installationExpected Date:27 June 2025Expected Date:27 June 2025Expected Date:27 June 2025$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$399.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP) -
Stock Code:BBBB-PF30-B3$54.08 (RRP)
Add To Cart
-
Stock Code:WTBB-T47I-30-RSIL
Wolf Tooth T47 Internal Bottom Brackets are engineered to be smooth, durable, lightweight, fast, and user-serviceable. The ground-up design features custom bearings, seals, bushings, and cups, which eliminate creaking and balance best-in-class weather sealing with optimized bearing radial compression, alignment, and preload for low drag.
The bearings in Wolf Tooth Bottom Brackets feature a custom design. The balls and race are made from a hardened chrome bearing steel. This has a higher surface hardness than stainless, which improves the durability of bearing races and reduces spinning resistance and noise. An ACOSUR ZNA coating has also been applied to the race to provide corrosion resistance that is equal to or better than stainless steel after a 500-hour saltwater test. Bearing material paired with an extensive sealing system and the elimination of metal-on-metal contact means Wolf Tooth Bottom Brackets have superior performance in all conditions.
- Compatible with 30mm spindle cranksets
- Adjustable-width sleeve fits 85.5mm - 92mm T47 Internal bottom bracket shells
- Best-in-class weather sealing protects bearings from water, mud, and debris
- Custom polymer spindle bushings eliminate creaking
- Installation and removal with standard 52-16 spline tool
- Replacement parts available
- Engineered, machined, and assembled at Wolf Tooth HQ in Minnesota, USA
- Lifetime warranty on the bearings
Bottom brackets ship with the following shell and spindle spacers:
- 2x 2.5mm shell spacers
- 2x 0.5mm, 2x 1mm, 2mm, 3mm, 5mm 30mm spindle spacers$270.00 (RRP)Add To Cart
